Hi,
I have compiled the u-boot(MPC8349EMDS) successfully. but the result
u-boot.bin is so large, extend 0xfe000000 If I modify the TEXT_BASE value in
board/mpc8349emds/config.mk , the u-boot.bin size is changed.
The u-boot code version is 1.1.6 and eldk version is 5.1
Following the instruction, I set the environment as $ source
/opt/eldk-5.1/powerpc/environment-setup-* $ export CROSS_COMPILE=powerpc-linux-
$ export ARCH=powerpc
[hniu@host u-boot-1.1.6]$ make
When I use eldk-4.2 tool chain, that is OK. and anything wrong?
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
