There is already CONFIG_SYS_NAND_BASE (or CONFIG_SYS_NAND_BASE_LIST) which
must be defined for nand.c. Use that. nand.c sets IO_ADDR_R with that.
Signed-off-by: Timo Ketola <t...@exertus.fi>
---
drivers/mtd/nand/mxc_nand.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 73813a2..fcee20d 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -1361,7 +1361,7 @@ int board_nand_init(struct nand_chip *this)
this->read_buf = mxc_nand_read_buf;
this->verify_buf = mxc_nand_verify_buf;
- host->regs = (struct nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
+ host->regs = this->IO_ADDR_R;
host->clk_act = 1;
#ifdef CONFIG_MXC_NAND_HWECC
--
1.7.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
