On 04/02/2012 05:18 PM, Simon Glass wrote: > This series adds support for warm boot, allowing the device to suspend > and resume. U-Boot sets up some 'warm boot' code in a special area such > that the SOC can find it on a resume. This code is responsible for > setting up memory and clocked and then allowing the OS to continue > where it left off. > > Also included here is support for the EMC, which allows setting the memory > timings correctly in U-Boot for maximum speed operation.
The series partially: Tested-by: Stephen Warren <swar...@wwwdotorg.org> I tested that on both Harmony and Seaboard, this series didn't seem to impact existing operation (boot to a command-prompt, load files from an SD card, produce serial output). I didn't actually test LP0. Note: Neither board appears to be able to actually boot a kernel any more, failing with the following error: ============= Starting kernel ... Uncompressing Linux... done, booting the kernel. Warning: Neither atags nor dtb found ============= However, this problem is present in u-boot-tegra/master before any changes in this series. Tom, do you want me to file an internal bug for this? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
