Hi Prafulla, On Mon, Apr 2, 2012 at 7:49 AM, Prafulla Wadaskar <prafu...@marvell.com> wrote: > Yes, the location is correct. > > May you please go through marvell bootloader code (if you have), I hope they > might have hardcoded the messages. > > > > Regards.. > > Prafulla . . . > > > > ________________________________ > > From: David Purdy [mailto:david.c.pu...@gmail.com] > Sent: 02 April 2012 17:04 > To: Prafulla Wadaskar > Subject: Re: Marvell/Kirkwood: 6192 vs. 6281 - does U-Boot correctly > distinguish between the two? > > > > Prafulla, > > This is what I see... > > On Mon, Apr 2, 2012 at 12:05 AM, Prafulla Wadaskar <prafu...@marvell.com> > wrote: > > > > On mainlined u-boot, device id is read from the > PCIE_Express_Vendor_Device_ID register (offset 0x4000) > > > Pogov4> md f1040000 1 > f1040000: 628111ab ...b > > But is this the correct location? > > > So it should display whatever value this register has. > > As per specification it should display 6192 (in your case) > > May be on this device 6192 this register reflects wrong value, in Marvell’s > u-boot there may be some code tweak to display correct value. > > > > BTW: mainlined u-boot supports 6192 just for basic boot operation (I don’t > have a board based on 6192 :–( ). > > Patches are welcomed to extend it’s support. > > > > Regards.. > > Prafulla . .. > > > regards, > > Dave >
Is there a most-recent Errata document that you can point me to? I've got the 819x Hardware Specifications docs from December 2008, but for instance, the MPP Function Summary doesn't agree w/ what posted in mainline; most of it is the same, but some parts are different. Maybe you have a link? regards and thanks, Dave _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
