On Tue, Apr 03, 2012 at 10:42:38PM -0400, Mike Frysinger wrote:
> On Tuesday 03 April 2012 19:45:11 Tom Rini wrote:
> > On Tue, Apr 03, 2012 at 05:35:25PM -0400, Mike Frysinger wrote:
> > > On Thursday 22 March 2012 15:09:14 Tom Rini wrote:
> > > > --- a/include/configs/omap3_common.h
> > > > +++ b/include/configs/omap3_common.h
> > > >
> > > > +/*
> > > > + * Default serial port configuration is an NS16550-compatible UART.
> > > > + * Boards can override this as needed with CONFIG_SERIAL_MULTI
> > > > + */
> > > > +#ifndef CONFIG_SERIAL_MULTI
> > > > +#define CONFIG_SYS_NS16550
> > > > +#define CONFIG_SYS_NS16550_SERIAL
> > > > +#define CONFIG_SYS_NS16550_REG_SIZE (-4)
> > > > +#define CONFIG_SYS_NS16550_CLK 48000000
> > > > +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400,
> > > > 57600,\
> > > > + 115200}
> > > > +#endif
> > >
> > > the baudrate table is fairly independent of the serial driver. might
> > > want to split that out into its own ifndef/define/endif check.
> >
> > What I really wanted here was a test for "not using the SoM UART".
> > Looking at the examples we have today, it's either the SoM and the above
> > table but differing in which UART is physically exposed or it's
> > SERIAL_MULTI and wants it's own baudrate table.
>
> not sure what you mean. CONFIG_SYS_BAUDRATE_TABLE is used in
> common/cmd_nvedit.c, so i'm not sure what you mean by having diff values
> depending on the diff uart setups ...
The example here is the omap3_zoom2. It doesn't use the SoM UART, sets
SERIAL_MULTI and defines the baudrate table to just 115200. This is why
I stuck the baudrate table in with !SERIAL_MULTI.
> > Part of me thinks I should whack at include/config_defaults.h and add
> > something like #ifndef CONFIG_SYS_BAUDRATE_TABLE, standard rates,
> > #endif. And same for CONFIG_SYS_PROMPT_HUSH_PS2 and probably a few
> > others.
>
> would make sense to me, although i'd cut out 4800 from the default list
Agreed.
--
Tom
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
