Misaligned warnings are useful to debug faulty drivers.
A misaligned warning is printed also when the driver
is correct - use debug() instead of printf().
Signed-off-by: Stefano Babic <sba...@denx.de>
CC: Albert Aribaud <albert.u.b...@aribaud.net>
CC: Mike Frysinger <vap...@gentoo.org>
CC: Marek Vasut <ma...@denx.de>
---
Changes since V1:
This substitutes [PATCH 2/4] net: round up before calling flush_cache
- change warning in cache.c instead of fixing cmd_net.c
(M. Frysinger, M. Vasut)
arch/arm/cpu/arm926ejs/cache.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/cache.c b/arch/arm/cpu/arm926ejs/cache.c
index 5b23e3a..4430578 100644
--- a/arch/arm/cpu/arm926ejs/cache.c
+++ b/arch/arm/cpu/arm926ejs/cache.c
@@ -55,7 +55,7 @@ static int check_cache_range(unsigned long start, unsigned
long stop)
ok = 0;
if (!ok)
- printf("CACHE: Misaligned operation at range [%08lx, %08lx]\n",
+ debug("CACHE: Misaligned operation at range [%08lx, %08lx]\n",
start, stop);
return ok;
--
1.7.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
