Dear Lauri Hintsala, > Hi Marek, > > I built U-Boot 2012.04-rc1 and tried it with mx28evk. MMC seems to be > broken. Reverting your commit 3687c4 (i.MX28: Do data transfers via DMA > in MMC driver) fix the issue.
CCing Fabio, can you test? Also, CCing proper ML. > Also there is issue in setting MAC address. Console logs are at the end > of this mail. > > Best regards, > Lauri Hintsala > > > --- > > U-Boot 2012.04-rc1 (Apr 02 2012 - 17:19:53) > > Freescale i.MX28 family at 454 MHz > DRAM: 128 MiB > MMC: MXS MMC: 0 > MMC0: DMA transfer failed > MMC0: DMA transfer failed > MMC0: DMA transfer failed > MMC0: DMA transfer failed > MMC init failed > Using default environment > > In: serial > Out: serial > Err: serial > Net: FEC0 > Warning: failed to set MAC address > , FEC1 > Warning: failed to set MAC address > > Hit any key to stop autoboot: 0 > MX28EVK U-Boot > mmc rescan > MMC0: DMA transfer failed > MMC0: DMA transfer failed > MMC0: DMA transfer failed > MMC0: DMA transfer failed Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
