Am 2012-04-01 18:14, schrieb Marek Vasut: > Dear Jens Scharsig, > >> * add USB host support to eb_cpux9k2 board > > Did you test this too?
Of course, I've test this with/against current RC1. > > CCing Albert, Albert do you want me to push this through staging or you'll > pick > this? > >> Signed-off-by: Jens Scharsig <js_at...@scharsoft.de> >> --- >> include/configs/eb_cpux9k2.h | 14 ++++++++++++++ >> 1 files changed, 14 insertions(+), 0 deletions(-) >> >> diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h >> index 9046cf0..eb05e2a 100644 >> --- a/include/configs/eb_cpux9k2.h >> +++ b/include/configs/eb_cpux9k2.h >> @@ -139,6 +139,8 @@ >> #define CONFIG_CMD_PING >> #define CONFIG_I2C_CMD_NO_FLAT >> #define CONFIG_I2C_CMD_TREE >> +#define CONFIG_CMD_USB >> +#define CONFIG_CMD_FAT >> >> #define CONFIG_SYS_LONGHELP >> >> @@ -169,6 +171,18 @@ >> /* >> * Hardware drivers >> */ >> +#define CONFIG_USB_ATMEL >> +#define CONFIG_USB_OHCI_NEW >> +#define CONFIG_AT91C_PQFP_UHPBUG >> +#define CONFIG_USB_STORAGE >> +#define CONFIG_DOS_PARTITION >> +#define CONFIG_ISO_PARTITION >> +#define CONFIG_EFI_PARTITION >> + >> +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 >> +#define CONFIG_SYS_USB_OHCI_CPU_INIT >> +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 >> +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" >> >> /* >> * UART/CONSOLE > > Best regards, > Marek Vasut Tested-by: Jens Scharsig <js_at...@scharsoft.de> Best regards Jens Scharsig _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
