Donghwa,
On 30 March 2012 10:59, Donghwa Lee <dh09....@samsung.com> wrote:
> To get lcd source clock in EXYNOS display driver, added get_lcd_clk()
> interface.
>
> Signed-off-by: Donghwa Lee <dh09....@samsung.com>
> Signed-off-by: Inki Dae <inki....@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
> ---
> arch/arm/cpu/armv7/exynos/clock.c | 50
> +++++++++++++++++++++++++++++++++++++
> 1 files changed, 50 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/exynos/clock.c
> b/arch/arm/cpu/armv7/exynos/clock.c
> index 2f7048b..af66d5c 100644
> --- a/arch/arm/cpu/armv7/exynos/clock.c
> +++ b/arch/arm/cpu/armv7/exynos/clock.c
> @@ -414,6 +414,51 @@ static void exynos5_set_mmc_clk(int dev_index, unsigned
> int div)
> writel(val, addr);
> }
>
> +/* get_lcd_clk: return lcd clock frequency */
> +static unsigned long exynos4_get_lcd_clk(void)
> +{
> + struct exynos4_clock *clk =
> + (struct exynos4_clock *)samsung_get_base_clock();
> + unsigned long pclk, sclk;
> + unsigned int sel;
> + unsigned int ratio;
> +
> + /*
> + * CLK_SRC_LCD0
> + * FIMD0_SEL [3:0]
> + */
> +#if defined(CONFIG_EXYNOS4210)
> + sel = readl(&clk->src_lcd0);
> +#else
> + sel = readl(&clk->src_lcd);
> +#endif
You should split the function for exynos4 and exynos5.
Please don't use ifdef.
> + sel = sel & 0xf;
> +
> + if (sel == 0x6)
> + sclk = get_pll_clk(MPLL);
> + else if (sel == 0x7)
> + sclk = get_pll_clk(EPLL);
> + else if (sel == 0x8)
> + sclk = get_pll_clk(VPLL);
> + else
> + return 0;
> +
> + /*
> + * CLK_DIV_LCD0
> + * FIMD0_RATIO [3:0]
> + */
> +#if defined(CONFIG_EXYNOS4210)
> + ratio = readl(&clk->div_lcd0);
> +#else
> + ratio = readl(&clk->div_lcd);
> +#endif
> + ratio = ratio & 0xf;
> +
> + pclk = sclk / (ratio + 1);
> +
> + return pclk;
> +}
> +
> unsigned long get_pll_clk(int pllreg)
> {
> if (cpu_is_exynos5())
> @@ -453,3 +498,8 @@ void set_mmc_clk(int dev_index, unsigned int div)
> else
> exynos4_set_mmc_clk(dev_index, div);
> }
> +
> +unsigned long get_lcd_clk(void)
> +{
> + return exynos4_get_lcd_clk();
> +}
Thanks.
Minkyu Kang.
--
from. prom.
www.promsoft.net
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
