On Wed, Mar 28, 2012 at 12:16 AM, Marek Vasut <marek.va...@gmail.com> wrote: > Dear Scott Wood, > >> On 03/27/2012 03:53 PM, Wolfgang Denk wrote: >> > Dear Frank, >> > >> > In message > <CADNf2sxrQFDU0LLQWp5huRGgQiKbaLik1+2C=Oj=gjorp6x...@mail.gmail.com> you > wrote: >> >> I'm trying to figure out if anyone has ported a PPC system to QEMU >> >> that is capable of booting U-Boot. Similar to the ARM versatilepb >> >> target, but for PPC instead. I've tried the Bamboo and MPC8544DS but >> >> it seems they only use stubs to OS calls and parses a DTB for info. >> > >> > Did you check which configurations the Yocto project are using? They >> > provide qemu based emulations for ARM, MIPS, PPC and x86, and I would >> > be really surprised if the ARM and PPC configs were not based on >> > U-Boot ... [ARM: beagleboard; PPC: mpc8315e-rdb; MIPS: >> > routerstationpro] >> >> I'm not familiar with what Yocto does, but at least for Freescale PPC >> chips QEMU does not emulate enough of the hardware to run U-Boot (at >> least, not without significant U-Boot hacking that I'm not aware of >> anyone having done). QEMU loads Linux directly. >> >> I don't see mpc83xx support in QEMU at all. > > Yep, either bamboo or taihu don't boot for me in qemu :-( > >>
Hi Marek, taihu was my next target to test, so thanks for sparing my time. Next would be to try to dig up a target called Walnut. Check this: http://lists.denx.de/pipermail/u-boot/2008-November/043400.html I cannot see that QEMU lists walnut as a target. Maybe the patches wasn't sent? Best regards, Frank _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
