The FSL PCI driver uses local prototypes for
pciauto_[pre|post]scan_setup_bridge(), this does not seem right,
so move them to the <pci.h> file.
Fixed a small extern declaration too, this is harmless but distracts
the view since all other prototypes are explicitly external.
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
---
drivers/pci/fsl_pci_init.c | 5 -----
include/pci.h | 6 +++++-
2 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index d04a08c..1d75a82 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -47,11 +47,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define FSL_PCIE_CFG_RDY 0x4b0
#define FSL_PROG_IF_AGENT 0x1
-void pciauto_prescan_setup_bridge(struct pci_controller *hose,
- pci_dev_t dev, int sub_bus);
-void pciauto_postscan_setup_bridge(struct pci_controller *hose,
- pci_dev_t dev, int sub_bus);
-
#ifndef CONFIG_SYS_PCI_MEMORY_BUS
#define CONFIG_SYS_PCI_MEMORY_BUS 0
#endif
diff --git a/include/pci.h b/include/pci.h
index 7d98ad4..eba122f 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -527,8 +527,12 @@ extern void pciauto_setup_device(struct pci_controller
*hose,
struct pci_region *mem,
struct pci_region *prefetch,
struct pci_region *io);
+extern void pciauto_prescan_setup_bridge(struct pci_controller *hose,
+ pci_dev_t dev, int sub_bus);
+extern void pciauto_postscan_setup_bridge(struct pci_controller *hose,
+ pci_dev_t dev, int sub_bus);
extern void pciauto_config_init(struct pci_controller *hose);
-int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
+extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
extern pci_dev_t pci_find_device (unsigned int vendor, unsigned int device,
int index);
extern pci_dev_t pci_find_devices (struct pci_device_id *ids, int index);
--
1.7.7.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
