Hi,
2012/3/21 <phil.edwor...@renesas.com>:
> Hi Nobuhiro,
>
>
>
>> I cannot reproduce this problem. I am using gcc-4.6 and gcc-4.4.
> I used the CodeSourcery G++ Lite 4.4-200 toolchain.
>
>
>> And I think that this problem is not revised with your patch.
>> I think that the contents of the patch are right.
> My change makes the ecovec Makefile the same structure as the other SH
> boards.
>
> I checked and found that the build error only occurs with out-of-tree
> builds.
OK, I confirmed this with out-of-tree build.
Applied.
Thanks.
Nobuhiro
>
>
>> 2012/3/17 Phil Edworthy <phil.edwor...@renesas.com>:
>> > Build error was with board/renesas/ecovec/lowlevel_init.S
>> > include/version.h: Assembler messages:
>> > include/version.h:41: Error: unknown opcode
>> > lowlevel_init.S:48: Error: unknown opcode
>> > lowlevel_init.S:51: Error: unknown opcode
>> > etc
>> >
>> > Signed-off-by: Phil Edworthy <phil.edwor...@renesas.com>
>> > ---
>> > board/renesas/ecovec/Makefile | 8 ++++++--
>> > 1 files changed, 6 insertions(+), 2 deletions(-)
>> >
>> > diff --git a/board/renesas/ecovec/Makefile
>> > b/board/renesas/ecovec/Makefile
>> > index 8fdc0c9..b592a9c 100644
>> > --- a/board/renesas/ecovec/Makefile
>> > +++ b/board/renesas/ecovec/Makefile
>> > @@ -25,8 +25,12 @@ LIB = $(obj)lib$(BOARD).o
>> > COBJS := ecovec.o
>> > SOBJS := lowlevel_init.o
>> >
>> > -$(LIB): $(obj).depend $(COBJS) $(SOBJS)
>> > - $(call cmd_link_o_target, $(COBJS) $(SOBJS))
>> > +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
>> > +OBJS := $(addprefix $(obj),$(COBJS))
>> > +SOBJS := $(addprefix $(obj),$(SOBJS))
>> > +
>> > +$(LIB): $(OBJS) $(SOBJS)
>> > + $(call cmd_link_o_target, $(OBJS) $(SOBJS))
>> >
>> >
>> > #########################################################################
>> >
>> > --
>> > 1.7.0.4
>> >
>
> Best regards,
> Phil
--
Nobuhiro Iwamatsu
iwamatsu at {nigauri.org / debian.org}
GPG ID: 40AD1FA6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
