Hi Wolfgang, On Wed, Mar 21, 2012 at 4:07 PM, Wolfgang Denk <w...@denx.de> wrote: > Dear Simon Glass, > > In message > <capnjgz0jtsiocq+u2yiadl6cwv711duww5ut88me3ohb-nn...@mail.gmail.com> you > wrote: >> >> > No. I do not want to see any PRE_CONSOLE_UART or pre_console_putc() >> > stuff, because this is bogus. If you do output to a serial UART port, >> > this _is_ your console. Just use it in the standard war. >> > >> > I made my mind up: I want to get rid of all this "pre_console" UART >> > stuff. >> >> OK, so revert that commit? > > It hasn't hit mainline yet, or has it?
Yes, it is there, sorry. > >> In that case I have a question. How can we get console output in the >> event of a panic before console_ready() is called? > > You cannot, by definition. You cannot output anything to the console > without initializing it before. > > This is why initializing the serial console has always been one of the > very, very first initialization steps in U-Boot. So if actually you want a pre-console panic() to be silent then that's fine. It's a little unfriendly though - so would you be interested in keeping board_pre_console_putc() around if we could solve this entirely with code in there? It turns out that Tegra has a setting for console UART in the hardware parameters that we can access.( I won't ask you about how to handle a panic() in SPL yet). Regards, Simon > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de > There are three ways to get something done: do it yourself, hire > someone, or forbid your kids to do it. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot