Change the parent UART clock to be PLL2, so that U-boot can also boot
a Freescale 2.6.35 kernel for mx53.
FSL kernel and U-boot changed the UART parent from PLL3 to PLL2 to avoid
conflicts with IPU clocks, so that the video resolution can be changed
without affecting the UART clock.
On a 2.6.35 kernel the serial console is messed up after IPU driver is loaded
and this patch fixes this problem.
Tested on a mx53loco board booting a FSL kernel and also a mainline kernel.
Reported-by: Otavio Salvador <ota...@ossystems.com.br>
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 20 +++++++++++++++++---
1 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
index 01f6d75..90c6ec1 100644
--- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
@@ -284,10 +284,24 @@
ldr r1, =0x00C30321
str r1, [r0, #CLKCTL_CSCDR1]
#elif defined(CONFIG_MX53)
+ /* Switch peripheral to PLL2 */
+ ldr r0, =CCM_BASE_ADDR
+ ldr r1, =0x00808145
+ orr r1, r1, #(2 << 10)
+ orr r1, r1, #(0 << 16)
+ orr r1, r1, #(1 << 19)
+ str r1, [r0, #CLKCTL_CBCDR]
+
+ ldr r1, =0x00016154
+ str r1, [r0, #CLKCTL_CBCMR]
+ /* Change uart clk parent to pll2*/
+ ldr r1, [r0, #CLKCTL_CSCMR1]
+ and r1, r1, #0xfcffffff
+ orr r1, r1, #0x01000000
+ str r1, [r0, #CLKCTL_CSCMR1]
ldr r1, [r0, #CLKCTL_CSCDR1]
- orr r1, r1, #0x3f
- eor r1, r1, #0x3f
- orr r1, r1, #0x21
+ and r1, r1, #0xffffffc0
+ orr r1, r1, #0x0a
str r1, [r0, #CLKCTL_CSCDR1]
#endif
/* make sure divider effective */
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
