Hi Simon On Wed, Mar 21, 2012 at 11:19 AM, Simon Glass <s...@chromium.org> wrote: > Hi Graeme, > > On Tue, Mar 20, 2012 at 5:17 PM, Graeme Russ <graeme.r...@gmail.com> wrote: >> Hi Simon,
>> And we are talking about one board vendor taking a SoC and using UARTA >> for the panic output and another board vendor deciding to use UARTB - But >> surely these vendors will create a separate config file for their boards. > > Nope. There is only one u-boot.bin for all boards that use this SOC. And this is what I simply don't grok - Why have a single board config for a range of boards that are obviously different? I suppose I haven't dealt with device tree and I imagine that is what this is all about. But to me, device trees are a construct for a higher level of operation (the OS) not the boot loader (although I get that the boot loader can parse the device tree in order to pick up what devices are installed and need some kind of low-level initialisation) I think at such a low level you really have to say 'hey, these boards are different and need a different configuration' unless you put something in hardware that allows U-Boot to pick up on the difference without needing to initialise _anything_ similar to what Stephen has done to pass the debug UART info to Linux via a scratch register Regards, Graeme _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot