Dear Simon Glass, In message <capnjgz3p_qt42ye+hxe86owden8c9gr+m4e+jwkgdhngd7u...@mail.gmail.com> you wrote: > > OK good. Hoping it sorts out the command success/failure problem you > saw with the last version also.
I've pulled it, further testing will show ;-) > Out of interest what tool are you using to display that information? bloat-o-meter from the kernel directory, like that: -> bloat-o-meter u-boot-before-arm u-boot-after-arm add/remove: 1/0 grow/shrink: 5/38 up/down: 212/-1404 (-1192) function old new delta cmd_process - 180 +180 static.mod_mem 316 328 +12 do_env_export 596 604 +8 do_run 116 120 +4 do_mem_crc 168 172 +4 do_env_set 28 32 +4 do_ubifs_mount 88 84 -4 do_nandboot 608 604 -4 do_mem_mw 188 184 -4 do_mem_loop 244 240 -4 do_mem_cp 216 212 -4 do_gpio 288 284 -4 do_go 112 108 -4 do_ext2ls 296 292 -4 do_ext2load 768 764 -4 do_env_edit 104 100 -4 do_env_default 72 68 -4 netboot_common 676 668 -8 do_usbboot 836 828 -8 do_spi_flash 1364 1356 -8 do_setexpr 416 408 -8 do_nand 2476 2468 -8 do_i2c_mw 252 244 -8 do_i2c_md 424 416 -8 do_i2c_loop 220 212 -8 do_i2c_crc 276 268 -8 do_date 284 276 -8 static.mod_i2c_mem 520 508 -12 do_sleep 128 116 -12 do_ping 132 120 -12 do_mtdparts 1408 1396 -12 do_mem_md 216 204 -12 do_mem_cmp 396 384 -12 do_ubifs_load 212 196 -16 do_mmcops 1072 1056 -16 do_mii 1920 1904 -16 do_mem_nm 24 8 -16 do_mem_mm 24 8 -16 do_i2c_read 188 172 -16 do_eeprom 292 276 -16 do_i2c_nm 28 8 -20 do_i2c_mm 28 8 -20 run_list_real 2072 1984 -88 run_command 976 8 -968 Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "It is easier to port a shell than a shell script." - Larry Wall _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
