Hi Pavel, On Friday 24 February 2012 19:16:46 Pavel Machek wrote: > I have a problem here: "reset halt" does not reset the board; probably > some kind of BDI problem. I tried playing with BDI config, but was not > successful. > > I tried to load u-boot from u-boot using: > > u-boot> tftp 0x00700000 192.168.1.1:/spear1310eval/u-boot.bin > > Using mii0 device > TFTP from server 192.168.1.1; our IP address is 192.168.20.47 > Filename '/spear1310eval/u-boot.bin'. > Load address: 0x700000 > Loading: ############## > done > Bytes transferred = 193032 (2f208 hex) > u-boot> go 0x00700000 > ## Starting application at 0x00700000 ... > > > U-Boot 2010.03-lsp-3.0-rc7 (Sep 15 2011 - 13:52:19) > SPEAr-emlix-CCLite-BSP-0.11
Not bad so far. :) > ...it started something. According to gdb it looks like "new" u-boot > executes briefly, but fails in C code while processing intialization, > and it seems that "old" u-boot takes over. (Some kind of failure and > board resets itself?). A few thoughts: - Is this the original (installed in flash) image or different one? - If it is a new image, did you try booting the original U-Boot version this way as well? - Are the load and start addresses ok? Did you check this with the original images (iminfo)? Sorry, no more time mow. Into the weekend... ;) Cheers, Stefan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
