The flash header v2 supports different flash offsets for different
boot devices. E.g. parallel NOR or OneNAND use a different offset
than FLASH_OFFSET_STANDARD (== 0x400).
The flash offset is correctly read from the configuration in
parse_cfg_cmd(). But is then overwritten wrongly in set_imx_hdr_v2().
Fix this by removing this overwriting. Use the flash offset
correclty read from the configuration, instead.
Signed-off-by: Dirk Behme <dirk.be...@de.bosch.com>
CC: Jason Liu <liu.h.ja...@gmail.com>
CC: Stefano Babic <sba...@denx.de>
---
tools/imximage.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/tools/imximage.c b/tools/imximage.c
index 1e0f5d4..e9947f1 100644
--- a/tools/imximage.c
+++ b/tools/imximage.c
@@ -253,9 +253,6 @@ static void set_imx_hdr_v2(struct imx_header *imxhdr,
uint32_t dcd_len,
imx_header_v2_t *hdr_v2 = &imxhdr->header.hdr_v2;
flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr;
- /* Set default offset */
- imxhdr->flash_offset = FLASH_OFFSET_STANDARD;
-
/* Set magic number */
fhdr_v2->header.tag = IVT_HEADER_TAG; /* 0xD1 */
fhdr_v2->header.length = cpu_to_be16(sizeof(flash_header_v2_t));
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
