Hi,
I am using u-Boot [2009.08-CanyonlandsOptimized_2.6.30_1.13-01] in
canyonlands board to flash my ram file system (which I need to do often). I go
in step to erase/tftp/copy the binary in my flash.
era 0xfc200000 0xfd5fffff
tftp 0x200000 canyonlands/ramdisk.img
cp.b ${fileaddr} 0xfc200000 ${filesize}
other than copy command everything works fine. The copy command bails out with
error message "flash not erased". Size of ramdisk image is ~7MB.
I have verified the sectors for erase operation done properly (i.e filled with
0xFFFFFFFF).
After giving 'n" number of shot copy works great. I suspect timing problem
which degrades with age of flash memory.
I have acquired a new board and i see the same problem.
Can some one help me out ?
Thank You
Sanjoy Saha
::DISCLAIMER::
-----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended
for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates.
Any views or opinions presented in
this email are solely those of the author and may not necessarily reflect the
opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of
this message without the prior written consent of the author of this e-mail is
strictly prohibited. If you have
received this email in error please delete it and notify the sender
immediately. Before opening any mail and
attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
