Christian, On Thu, Feb 02, 2012 at 19:56:45, Christian Riesch wrote: > Hi, > Thank you for re-submitting the patchset! > > On Thu, Feb 2, 2012 at 2:42 PM, Manjunath Hadli <manjunath.ha...@ti.com> > wrote: > > There are two da850 SOC based EVMs, one from Spectrum digital and > > other from Logic PD. Boards from Spectrum digital have mac address > > stored in I2C EEPROM and they have spi flash manufactured by WINBOND. > > Boards from Logic PD store mac address in ST Microelectronics SPI > > flash. This patch series adds support to read mac address from the > > appropriate device. > > Ok, so we have two configurations, we have da850evm which is for LogicPD's > OMAP-L138 SoM and for LogicPD's AM1808 SoM, and we have da850_am18xxevm which > must be used for the AM1808 board from Spectrum Digital. Is that correct? Yes. > > I wonder if we should change the name of the da850_am18xxevm configuration. > It's quite confusing, until today I thought that the da850_am18xxevm was a > configuration for LogicPD's AM1808 SoM... Are there also OMAP-L138 boards > from Spectrum Digital? Spectrum Digital do not have any OMAP-L138 EVMs. They have only AM18x evms.
Regards, --Manju > > Regards, Christian > > > > > These patches have undergone a review previously, but since the tree > > has moved ahead Christian and Tom asked to resubmit the patches for > > review. > > (http://www.mail-archive.com/u-boot@lists.denx.de/msg76220.html) > > > > Manjunath Hadli (2): > > da850evm: add support to read mac address from spi flash > > da850evm: read mac address from I2C EEPROM on AM18x EVM > > > > board/davinci/da8xxevm/da850evm.c | 66 > > +++++++++++++++++++++++++++++++++++++ > > boards.cfg | 4 +- > > 2 files changed, 68 insertions(+), 2 deletions(-) > > > > _______________________________________________ > > U-Boot mailing list > > U-Boot@lists.denx.de > > http://lists.denx.de/mailman/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
