Albert, On Sat, Feb 4, 2012 at 8:35 AM, viresh kumar <viresh.li...@gmail.com> wrote:
> On Fri, Feb 3, 2012 at 10:24 AM, Albert ARIBAUD > <albert.u.b...@aribaud.net> wrote: > >>> On 2/1/12, Amit Virdi<amitvi...@gmail.com> wrote: > >>>> I'm in the process of updating platform support for spear series of > >>>> SoC on the latest u-boot. > >>>> I picked u-boot v2011.12. I tried compiling for different spear boards > >>>> (spear 300, 310, 300 and spear600). In every compilation, I'm getting > >>>> following errors: > >>>> > >>>> ----------------------- > >>>> arm-linux-ld: section .bss [007263cc -> 00728c5b] overlaps section > >>>> .rel.dyn [007263cc -> 0072a623] > >>>> arm-linux-ld: u-boot: section .bss lma 0x7263cc overlaps previous > >>>> sections > >>>> make: *** [u-boot] Error 1 > >>>> ----------------------- > >>>> > >>>> This is one case. > > > > > > In fact, .bss overlapping .rel.dyn is normal -- the linker file even > > explicitly states this with ".bss __rel_dyn_start (OVERLAY)". > > > > Ok. > > > Which compiler do you use and which board exactly are you building? > > > We are using internal STLinux distribution. I tried compiling for spear320, and I couldn't succeed. Just to move a step further, can you please try "make spear320" at your end? If the error is not received at your end, I can be sure that the problem is due to the distribution at my end. Thanks in advance. Regards Amit Virdi PS: I used v2011.12. "spear320" entry isn't there in the boards.cfg file. I shall be sending patch to update the same once I resolve this linking error.
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
