EDMR_INIT_CNT holds the check count of initialization.
Since there were more same values (1000), this collected as TIMEOUT_CNT.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu...@renesas.com>
---
drivers/net/sh_eth.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 0871575..1bc44a8 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -44,6 +44,8 @@
#define flush_cache_wback(...)
#endif
+#define TIMEOUT_CNT 1000
+
int sh_eth_send(struct eth_device *dev, volatile void *packet, int len)
{
struct sh_eth_dev *eth = dev->priv;
@@ -78,7 +80,7 @@ int sh_eth_send(struct eth_device *dev, volatile void
*packet, int len)
outl(EDTRR_TRNS, EDTRR(port));
/* Wait until packet is transmitted */
- timeout = 1000;
+ timeout = TIMEOUT_CNT;
while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--)
udelay(100);
@@ -134,7 +136,6 @@ int sh_eth_recv(struct eth_device *dev)
return len;
}
-#define EDMR_INIT_CNT 1000
static int sh_eth_reset(struct sh_eth_dev *eth)
{
int port = eth->port;
@@ -146,13 +147,13 @@ static int sh_eth_reset(struct sh_eth_dev *eth)
/* Perform a software reset and wait for it to complete */
outl(EDMR_SRST, EDMR(port));
- for (i = 0; i < EDMR_INIT_CNT; i++) {
+ for (i = 0; i < TIMEOUT_CNT ; i++) {
if (!(inl(EDMR(port)) & EDMR_SRST))
break;
udelay(1000);
}
- if (i == EDMR_INIT_CNT) {
+ if (i == TIMEOUT_CNT) {
printf(SHETHER_NAME ": Software reset timeout\n");
ret = -EIO;
}
--
1.7.7.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
