On Thu, 2012-01-26 at 10:08 -0700, Tom Rini wrote: > On Wed, Jan 25, 2012 at 1:06 PM, wilsonjonathan > <piercing_m...@hotmail.com> wrote: > > The u-boot loader is showing an incorrect size in the memory, and > > passing the invalid information to the kernel. > > What revision of the board do you have? Is this a 'classic' rev C4? Thanks. >
Using the denx u-boot, if it doesn't find u-boot.img it halts instead of then testing for u-boot.bin... so I put u-boot.img onto the mmc and the following came up. > U-Boot SPL 2011.12-00201-g137703b (Jan 26 2012 - 19:15:07) > Texas Instruments Revision detection unimplemented > OMAP SD/MMC: 0 > reading u-boot.img > reading u-boot.img > > > U-Boot 2011.12-00201-g137703b (Jan 26 2012 - 19:15:07) > > OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz > OMAP3 Beagle board + LPDDR/NAND > I2C: ready > DRAM: 1 GiB > NAND: 256 MiB > MMC: OMAP SD/MMC: 0 > *** Warning - bad CRC, using default environment > > In: serial > Out: serial > Err: serial > Beagle Rev C4 > timed out in wait_for_pin: I2C_STAT=0 > I2C read: I/O error > Unrecognized expansion board: 0 > Die ID #5468002400000000040365fa12014003 > Net: Net Initialization Skipped > No ethernet found. > Hit any key to stop autoboot: 0 > OMAP3 beagleboard.org # _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
