From: Andreas Bießmann <biessm...@corscience.de>
If one want to use fw_printenv/fw_setenv in special variants (eg compiled in
MTD parameters without configuration file) he need to change the sources.
This patch add the posibillity to change the behaviour of fw_printenv by
defining a specific configuration header at compile time.
Therefore no need to patch the sources for special environment which fits
better into automated build environments.
Signed-off-by: Andreas Bießmann <biessm...@corscience.de>
---
total: 0 errors, 0 warnings, 164 lines checked
NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX
MULTISTATEMENT_MACRO_USE_DO_WHILE
0001-tools-env-add-posibility-to-inject-configuration.patch has no obvious
style problems and is ready for submission.
changes since v1:
- use ?= style in Makefile as suggested by Mike
- remove c++ style comments in header
changes since v2:
- place copied/generated fw_env_config.h in include/generated
- adopt tools/env/Makefile to new placement of fw_env_config.h
changes since v3:
- add (C) header
- generate empty config.h for unconfigured U-Boot tree
- rebase
tools/env/Makefile | 29 +++++++++++++++---
tools/env/fw_env.h | 32 +++-----------------
tools/env/fw_env_config.h.in | 66 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 95 insertions(+), 32 deletions(-)
create mode 100644 tools/env/fw_env_config.h.in
diff --git a/tools/env/Makefile b/tools/env/Makefile
index 28b73da..4a0b2b0 100644
--- a/tools/env/Makefile
+++ b/tools/env/Makefile
@@ -2,6 +2,9 @@
# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
#
+# (C) Copyright 2012
+# Andreas Bießmann, Corscience GmbH&Co.KG, biessm...@corscience.de
+#
# See file CREDITS for list of people who contributed to this
# project.
#
@@ -24,26 +27,42 @@
include $(TOPDIR)/config.mk
HOSTSRCS := $(SRCTREE)/lib/crc32.c fw_env.c fw_env_main.c
-HEADERS := fw_env.h
+HEADERS := fw_env.h $(OBJTREE)/include/generated/fw_env_config.h
+FW_ENV_CONFIG ?= fw_env_config.h.in
# Compile for a hosted environment on the target
HOSTCPPFLAGS = -idirafter $(SRCTREE)/include \
- -idirafter $(OBJTREE)/include2 \
-idirafter $(OBJTREE)/include \
+ -idirafter $(OBJTREE)/include/generated \
-DUSE_HOSTCC
ifeq ($(MTD_VERSION),old)
HOSTCPPFLAGS += -DMTD_OLD
endif
-all: $(obj)fw_printenv
+all: $(obj)fw_printenv
# Some files complain if compiled with -pedantic, use HOSTCFLAGS_NOPED
-$(obj)fw_printenv: $(HOSTSRCS) $(HEADERS)
+$(obj)fw_printenv: $(HOSTSRCS) $(HEADERS)
$(HOSTCC) $(HOSTCFLAGS_NOPED) $(HOSTLDFLAGS) -o $@ $(HOSTSRCS)
+$(OBJTREE)/include/generated/fw_env_config.h: $(FW_ENV_CONFIG)
+ @cp -f $< $@
+
+# add additional dependency for .depend
+$(obj).depend: $(OBJTREE)/include/generated/fw_env_config.h
+
+ifneq ($(OBJTREE)/include/config.mk,$(wildcard $(OBJTREE)/include/config.mk))
+# our U-Boot tree is not configured, generate fake config.h
+$(OBJTREE)/include/config.h:
+ @cat /dev/null > $@
+
+# add additional dependency for .depend
+$(obj).depend: $(OBJTREE)/include/config.h
+endif
+
clean:
- rm -f $(obj)fw_printenv
+ rm -f $(obj)fw_printenv $(obj)fw_env_config.h
#########################################################################
diff --git a/tools/env/fw_env.h b/tools/env/fw_env.h
index 2dcb373..c237154 100644
--- a/tools/env/fw_env.h
+++ b/tools/env/fw_env.h
@@ -20,34 +20,10 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
+#ifndef _FW_ENV_H_
+#define _FW_ENV_H_
-/*
- * To build the utility with the run-time configuration
- * uncomment the next line.
- * See included "fw_env.config" sample file
- * for notes on configuration.
- */
-#define CONFIG_FILE "/etc/fw_env.config"
-
-#define HAVE_REDUND /* For systems with 2 env sectors */
-#define DEVICE1_NAME "/dev/mtd1"
-#define DEVICE2_NAME "/dev/mtd2"
-#define DEVICE1_OFFSET 0x0000
-#define ENV1_SIZE 0x4000
-#define DEVICE1_ESIZE 0x4000
-#define DEVICE1_ENVSECTORS 2
-#define DEVICE2_OFFSET 0x0000
-#define ENV2_SIZE 0x4000
-#define DEVICE2_ESIZE 0x4000
-#define DEVICE2_ENVSECTORS 2
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND
\
- "bootp; "
\
- "setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} "
\
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "
\
- "bootm"
+#include "fw_env_config.h"
extern int fw_printenv(int argc, char *argv[]);
extern char *fw_getenv (char *name);
@@ -58,3 +34,5 @@ extern int fw_env_write(char *name, char *value);
extern int fw_env_close(void);
extern unsigned long crc32 (unsigned long, const unsigned char *,
unsigned);
+
+#endif
diff --git a/tools/env/fw_env_config.h.in b/tools/env/fw_env_config.h.in
new file mode 100644
index 0000000..1f69c28
--- /dev/null
+++ b/tools/env/fw_env_config.h.in
@@ -0,0 +1,66 @@
+/*
+ * (C) Copyright 2011-2012
+ * Andreas Bießmann, Corscience GmbH&Co.KG, biessm...@corscience.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This is an example configuration for fw_printenv/fw_setenv
+ *
+ * If you like to specialize your build of fw_printenv you may copy this file,
+ * modify it and add FW_ENV_CONFIG define to the make call:
+ *
+ * make HOSTCC=${CROSS_COMPILE}gcc FW_ENV_CONFIG=/my/special/header env
+ *
+ * If the FW_ENV_CONFIG is not defined, this file will be used
+ */
+
+#ifndef _FW_ENV_CONFIG_H_
+#define _FW_ENV_CONFIG_H_
+
+/*
+ * To build the utility with the run-time configuration
+ * uncomment the next line.
+ * See included "fw_env.config" sample file
+ * for notes on configuration.
+ */
+#define CONFIG_FILE "/etc/fw_env.config"
+
+#define HAVE_REDUND /* For systems with 2 env sectors */
+#define DEVICE1_NAME "/dev/mtd1"
+#define DEVICE2_NAME "/dev/mtd2"
+#define DEVICE1_OFFSET 0x0000
+#define ENV1_SIZE 0x4000
+#define DEVICE1_ESIZE 0x4000
+#define DEVICE1_ENVSECTORS 2
+#define DEVICE2_OFFSET 0x0000
+#define ENV2_SIZE 0x4000
+#define DEVICE2_ESIZE 0x4000
+#define DEVICE2_ENVSECTORS 2
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#define CONFIG_BOOTCOMMAND
\
+ "bootp; "
\
+ "setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} "
\
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "
\
+ "bootm"
+
+#endif
--
1.7.8.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
