Dear =?ISO-8859-1?Q?=C9rico_Porto?=,
Please stop top posting / full quoting.
In message <CAG1KTJebU-QhhH2=ibfojsjjvaynh4hrfuzobnwz20uzq-5...@mail.gmail.com>
you wrote:
>
> Ok, this makes sense, but I think you mean:
No, I mean what I mean, not what you think I mean.
> memory start at 0x00000000
>
> mtest {
> start address: right after (malloc area+global data + stack)
> end address: relocaddr
> }
>
> memory end at 0x08000000
Wrong.
Assuming you have a simple configuration (no pRAM, no log buffer, no
video buffer etc.) then the memory map (as explained in the README,
btw) is like that:
top of RAM (in your case 0x08000000 - 1)
... U-Boot code, data and bss
relocaddr
... Malloc Arena
... Board Info Data and permanent copy of global data
... Stack (growing downward)
Depending on the size of your malloc arena you need to stay far enough
away from relocaddr; try with 1 MB or more.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
For every complex problem, there is a solution that is simple, neat,
and wrong. -- H. L. Mencken
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
