From: Heiko Schocher <h...@denx.de>
Signed-off-by: Heiko Schocher <h...@denx.de>
Signed-off-by: Simon Glass <s...@chromium.org>
---
README | 82 ++++++++++++++++++++++++-
arch/arm/lib/board.c | 3 +-
arch/blackfin/lib/board.c | 7 ++
arch/m68k/lib/board.c | 18 +++++-
arch/mips/lib/board.c | 7 ++
arch/powerpc/cpu/mpc8xx/video.c | 4 +
arch/powerpc/lib/board.c | 18 +++++-
common/cmd_date.c | 9 +++
common/cmd_dtt.c | 9 +++
common/cmd_i2c.c | 127 +++++++++++++++++++++++++-------------
common/stdio.c | 13 ++++-
include/i2c.h | 9 ---
12 files changed, 242 insertions(+), 64 deletions(-)
diff --git a/README b/README
index 7adf7c7..fe1c0d9 100644
--- a/README
+++ b/README
@@ -1669,9 +1669,85 @@ The following options need to be configured:
on those systems that support this (optional)
feature, like the TQM8xxL modules.
-- I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C
-
- These enable I2C serial bus commands. Defining either of
+- I2C Support: CONFIG_SYS_I2C
+
+ This enable the NEW i2c subsystem, and will allow you to use
+ i2c commands at the u-boot command line (as long as you set
+ CONFIG_CMD_I2C in CONFIG_COMMANDS) and communicate with i2c
+ based realtime clock chips or other i2c devices. See
+ common/cmd_i2c.c for a description of the command line
+ interface.
+
+ additional defines:
+
+ CONFIG_SYS_NUM_I2C_ADAPTERS
+ define how many i2c adapters you want to use on your
+ hardware. If you need only 1 i2c adapter, you can ommit
+ this define.
+
+ CONFIG_SYS_I2C_ADAPTERS
+ hold a list of adapters you want to use, for example:
+ {&soft_i2c_adap[0], &mpc5xxx_i2c_adap[0]}
+ with this configuration you have one soft_i2c adapter,
+ and one mpc5xxx i2c adapter.
+
+ No I2C adapters current suppor this new interface.
+
+ You need to define for each adapter a speed and a
+ slave address.
+
+ CONFIG_SYS_NUM_I2C_BUSSES
+ Hold the number of i2c busses you want to use. If you
+ don't use/have i2c muxes on your i2c bus, this
+ is equal to CONFIG_SYS_NUM_I2C_ADAPTERS, and you can
+ omit this define.
+
+ CONFIG_SYS_I2C_DIRECT_BUS
+ define this, if you don't use i2c muxes on your hardware.
+ if CONFIG_SYS_I2C_MAX_HOPS is not defined or == 0 you can
+ omit this define.
+
+ CONFIG_SYS_I2C_MAX_HOPS
+ define how many muxes are maximal consecutively connected
+ on one i2c bus.
+
+ CONFIG_SYS_I2C_BUSSES
+ hold a list of busses you want to use, only used if
+ CONFIG_SYS_I2C_DIRECT_BUS is not defined, for example
+ a board with CONFIG_SYS_I2C_MAX_HOPS = 1 and
+ CONFIG_SYS_NUM_I2C_BUSSES = 9:
+
+ CONFIG_SYS_I2C_BUSSES {{0, {I2C_NULL_HOP}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 1}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 2}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 3}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 4}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 5}}}, \
+ {1, {I2C_NULL_HOP}}, \
+ {1, {{I2C_MUX_PCA9544, 0x72, 1}}}, \
+ {1, {{I2C_MUX_PCA9544, 0x72, 2}}}, \
+ }
+
+ which defines
+ bus 0 on adapter 0 without a mux
+ bus 1 on adapter 0 without a PCA9547 on address 0x70
port 1
+ bus 2 on adapter 0 without a PCA9547 on address 0x70
port 2
+ bus 3 on adapter 0 without a PCA9547 on address 0x70
port 3
+ bus 4 on adapter 0 without a PCA9547 on address 0x70
port 4
+ bus 5 on adapter 0 without a PCA9547 on address 0x70
port 5
+ bus 6 on adapter 1 without a mux
+ bus 7 on adapter 1 without a PCA9544 on address 0x72
port 1
+ bus 8 on adapter 1 without a PCA9544 on address 0x72
port 2
+
+- Legacy I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C
+
+ NOTE: It is intended to move drivers to CONFIG_SYS_I2C which
+ provides the following compelling advantages:
+ 1. Heiko to fill in
+
+ ** Please consider updating your I2C driver now. **
+
+ These enable legacy I2C serial bus commands. Defining either of
(but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will
include the appropriate I2C driver for the selected CPU.
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 81293c3..8b86a7d 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -74,7 +74,8 @@ extern void dataflash_print_info(void);
#endif
#if defined(CONFIG_HARD_I2C) || \
- defined(CONFIG_SOFT_I2C)
+ defined(CONFIG_SOFT_I2C) || \
+ defined(CONFIG_SYS_I2C)
#include <i2c.h>
#endif
diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c
index e3ee4cd..660fa57 100644
--- a/arch/blackfin/lib/board.c
+++ b/arch/blackfin/lib/board.c
@@ -37,6 +37,10 @@
int post_flag;
#endif
+#if defined(CONFIG_SYS_I2C_ADAPTERS)
+#include <i2c.h>
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
__attribute__((always_inline))
@@ -353,6 +357,9 @@ void board_init_r(gd_t * id, ulong dest_addr)
/* Initialize stdio devices */
stdio_init();
+#if defined(CONFIG_SYS_I2C_ADAPTERS)
+ i2c_reloc_fixup();
+#endif
jumptable_init();
/* Initialize the console (after the relocation and devices init) */
diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
index 259b71c..17876d5 100644
--- a/arch/m68k/lib/board.c
+++ b/arch/m68k/lib/board.c
@@ -55,7 +55,8 @@
#include <version.h>
#if defined(CONFIG_HARD_I2C) || \
- defined(CONFIG_SOFT_I2C)
+ defined(CONFIG_SOFT_I2C) || \
+ defined(CONFIG_SYS_I2C_ADAPTERS)
#include <i2c.h>
#endif
@@ -140,11 +141,16 @@ static int init_func_ram (void)
/***********************************************************************/
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) \
+ || defined(CONFIG_SYS_I2C_ADAPTERS)
static int init_func_i2c (void)
{
puts ("I2C: ");
+#ifdef CONFIG_SYS_I2C
+ i2c_init_all();
+#else
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
puts ("ready\n");
return (0);
}
@@ -176,7 +182,8 @@ init_fnc_t *init_sequence[] = {
display_options,
checkcpu,
checkboard,
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) \
+ || defined(CONFIG_SYS_I2C_ADAPTERS)
init_func_i2c,
#endif
#if defined(CONFIG_HARD_SPI)
@@ -507,6 +514,11 @@ void board_init_r (gd_t *id, ulong dest_addr)
/* relocate environment function pointers etc. */
env_relocate ();
+#if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_ADAPTERS)
+ /* Adjust I2C subsystem pointers after relocation */
+ i2c_reloc_fixup();
+#endif
+
/*
* Fill in missing fields of bd_info.
* We do this here, where we have "normal" access to the
diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
index d998f0e..8c6d35e 100644
--- a/arch/mips/lib/board.c
+++ b/arch/mips/lib/board.c
@@ -35,6 +35,9 @@
#ifdef CONFIG_BITBANGMII
#include <miiphy.h>
#endif
+#if defined(CONFIG_SYS_I2C_ADAPTERS)
+#include <i2c.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -316,6 +319,10 @@ void board_init_r(gd_t *id, ulong dest_addr)
/* relocate environment function pointers etc. */
env_relocate();
+#if defined(CONFIG_SYS_I2C_ADAPTERS)
+ i2c_reloc_fixup();
+#endif
+
/* IP Address */
bd->bi_ip_addr = getenv_IPaddr("ipaddr");
diff --git a/arch/powerpc/cpu/mpc8xx/video.c b/arch/powerpc/cpu/mpc8xx/video.c
index 1bbf4cc..10e3e88 100644
--- a/arch/powerpc/cpu/mpc8xx/video.c
+++ b/arch/powerpc/cpu/mpc8xx/video.c
@@ -809,7 +809,11 @@ static void video_encoder_init (void)
/* Initialize the I2C */
debug ("[VIDEO ENCODER] Initializing I2C bus...\n");
+#ifdef CONFIG_SYS_I2C
+ i2c_init_all();
+#else
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
#ifdef CONFIG_FADS
/* Reset ADV7176 chip */
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index ff5888e..563da9a 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -99,7 +99,8 @@ extern void sc3_read_eeprom(void);
void doc_init(void);
#endif
#if defined(CONFIG_HARD_I2C) || \
- defined(CONFIG_SOFT_I2C)
+ defined(CONFIG_SOFT_I2C) || \
+ defined(CONFIG_SYS_I2C_ADAPTERS)
#include <i2c.h>
#endif
#include <spi.h>
@@ -214,11 +215,16 @@ static int init_func_ram(void)
/***********************************************************************/
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) \
+ || defined(CONFIG_SYS_I2C_ADAPTERS)
static int init_func_i2c(void)
{
puts("I2C: ");
+#ifdef CONFIG_SYS_I2C
+ i2c_init_all();
+#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
puts("ready\n");
return 0;
}
@@ -317,7 +323,8 @@ init_fnc_t *init_sequence[] = {
misc_init_f,
#endif
INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) \
+ || defined(CONFIG_SYS_I2C_ADAPTERS)
init_func_i2c,
#endif
#if defined(CONFIG_HARD_SPI)
@@ -823,6 +830,11 @@ void board_init_r(gd_t *id, ulong dest_addr)
* the environment is in EEPROM.
*/
+#if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_ADAPTERS)
+ /* Adjust I2C subsystem pointers after relocation */
+ i2c_reloc_fixup();
+#endif
+
#if defined(CONFIG_SYS_EXTBDINFO)
#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
#if defined(CONFIG_I2CFAST)
diff --git a/common/cmd_date.c b/common/cmd_date.c
index f0fa02a..21e72b8 100644
--- a/common/cmd_date.c
+++ b/common/cmd_date.c
@@ -50,8 +50,13 @@ int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char *
const argv[])
int old_bus;
/* switch to correct I2C bus */
+#ifdef CONFIG_SYS_I2C
+ old_bus = i2c_get_bus_num();
+ i2c_set_bus_num(CONFIG_SYS_RTC_BUS_NUM);
+#else
old_bus = I2C_GET_BUS();
I2C_SET_BUS(CONFIG_SYS_RTC_BUS_NUM);
+#endif
switch (argc) {
case 2: /* set date & time */
@@ -98,7 +103,11 @@ int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char *
const argv[])
}
/* switch back to original I2C bus */
+#ifdef CONFIG_SYS_I2C
+ i2c_set_bus_num(old_bus);
+#else
I2C_SET_BUS(old_bus);
+#endif
return rcode;
}
diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c
index cd94423..cb73614 100644
--- a/common/cmd_dtt.c
+++ b/common/cmd_dtt.c
@@ -69,8 +69,13 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *
const argv[])
/* Force a compilation error, if there are more then 32 sensors */
BUILD_BUG_ON(sizeof(sensors) > 32);
/* switch to correct I2C bus */
+#ifdef CONFIG_SYS_I2C
+ old_bus = i2c_get_bus_num();
+ i2c_set_bus_num(CONFIG_SYS_DTT_BUS_NUM);
+#else
old_bus = I2C_GET_BUS();
I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
+#endif
_initialize_dtt();
@@ -82,7 +87,11 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *
const argv[])
printf("DTT%d: %i C\n", i + 1, dtt_get_temp(sensors[i]));
/* switch back to original I2C bus */
+#ifdef CONFIG_SYS_I2C
+ i2c_set_bus_num(old_bus);
+#else
I2C_SET_BUS(old_bus);
+#endif
return 0;
} /* do_dtt() */
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index e795139..50d006f 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -1,4 +1,9 @@
/*
+ * (C) Copyright 2009
+ * Sergey Kubushyn, himself, k...@koi8.net
+ *
+ * Changes for unified multibus/multiadapter I2C support.
+ *
* (C) Copyright 2001
* Gerald Van Baren, Custom IDEAS, vanba...@cideas.com.
*
@@ -83,6 +88,8 @@
#include <malloc.h>
#include <asm/byteorder.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* Display values from last command.
* Memory modify remembered values are different from display memory.
*/
@@ -101,7 +108,8 @@ static uint i2c_mm_last_alen;
* pairs. The following macros take care of this */
#if defined(CONFIG_SYS_I2C_NOPROBES)
-#if defined(CONFIG_I2C_MULTI_BUS)
+#if (CONFIG_SYS_NUM_I2C_BUSSES > 1) || defined(CONFIG_I2C_MUX) || \
+ defined(CONFIG_I2C_MULTI_BUS)
static struct
{
uchar bus;
@@ -117,7 +125,7 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
#define COMPARE_BUS(b,i) ((b) == 0) /* Make compiler happy */
#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)] == (a))
#define NO_PROBE_ADDR(i) i2c_no_probes[(i)]
-#endif /* CONFIG_MULTI_BUS */
+#endif /* CONFIG_SYS_NUM_I2C_BUSSES > 1 */
#define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0]))
#endif
@@ -125,22 +133,23 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
#if defined(CONFIG_I2C_MUX)
static I2C_MUX_DEVICE *i2c_mux_devices = NULL;
static int i2c_mux_busid = CONFIG_SYS_MAX_I2C_BUS;
-
-DECLARE_GLOBAL_DATA_PTR;
-
#endif
#define DISP_LINE_LEN 16
/* implement possible board specific board init */
-void __def_i2c_init_board(void)
+int __def_i2c_init_board(void)
{
- return;
+ return 0;
}
-void i2c_init_board(void)
+int i2c_init_board(void)
__attribute__((weak, alias("__def_i2c_init_board")));
-/* TODO: Implement architecture-specific get/set functions */
+#if !defined(CONFIG_SYS_I2C)
+/*
+ * TODO: Implement architecture-specific get/set functions
+ * Should go away, if we switched completely to new multibus support
+ */
unsigned int __def_i2c_get_bus_speed(void)
{
return CONFIG_SYS_I2C_SPEED;
@@ -157,6 +166,7 @@ int __def_i2c_set_bus_speed(unsigned int speed)
}
int i2c_set_bus_speed(unsigned int)
__attribute__((weak, alias("__def_i2c_set_bus_speed")));
+#endif
/*
* get_alen: small parser helper function to get address length
@@ -564,7 +574,7 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int
argc, char * const argv
int j;
#if defined(CONFIG_SYS_I2C_NOPROBES)
int k, skip;
- uchar bus = GET_BUS_NUM;
+ unsigned int bus = GET_BUS_NUM;
#endif /* NOPROBES */
puts ("Valid chip addresses:");
@@ -1186,53 +1196,78 @@ static int do_sdram (cmd_tbl_t * cmdtp, int flag, int
argc, char * const argv[])
}
#endif
-#if defined(CONFIG_I2C_MUX)
-static int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char * const
argv[])
+#if (CONFIG_SYS_NUM_I2C_BUSSES > 1) && defined(CONFIG_SYS_I2C)
+int do_i2c_show_bus(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- int ret=0;
+ int i;
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+ int j;
+#endif
- if (argc == 1) {
+ if (argc == 0) {
/* show all busses */
- I2C_MUX *mux;
- I2C_MUX_DEVICE *device = i2c_mux_devices;
-
- printf ("Busses reached over muxes:\n");
- while (device != NULL) {
- printf ("Bus ID: %x\n", device->busid);
- printf (" reached over Mux(es):\n");
- mux = device->mux;
- while (mux != NULL) {
- printf (" %s@%x ch: %x\n", mux->name,
mux->chip, mux->channel);
- mux = mux->next;
+ for (i = 0; i < CONFIG_SYS_NUM_I2C_BUSSES; i++) {
+ printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name);
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+ for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) {
+ if (i2c_bus[i].next_hop[j].chip == 0)
+ break;
+ printf("->%s@0x%2x:%d",
+ i2c_bus[i].next_hop[j].mux.name,
+ i2c_bus[i].next_hop[j].chip,
+ i2c_bus[i].next_hop[j].channel);
}
- device = device->next;
+#endif
+ printf("\n");
}
} else {
- (void)i2c_mux_ident_muxstring ((uchar *)argv[1]);
- ret = 0;
+ /* show specific bus */
+ i = simple_strtoul(argv[1], NULL, 10);
+ if (i >= CONFIG_SYS_NUM_I2C_BUSSES) {
+ printf("Invalid bus %d\n", i);
+ return -1;
+ }
+ printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name);
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+ for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) {
+ if (i2c_bus[i].next_hop[j].chip == 0)
+ break;
+ printf("->%s@0x%2x:%d",
+ i2c_bus[i].next_hop[j].mux.name,
+ i2c_bus[i].next_hop[j].chip,
+ i2c_bus[i].next_hop[j].channel);
+ }
+#endif
+ printf("\n");
}
- return ret;
+
+ return 0 ;
}
-#endif /* CONFIG_I2C_MUX */
+#endif
-#if defined(CONFIG_I2C_MULTI_BUS)
-static int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char * const
argv[])
+#if CONFIG_SYS_NUM_I2C_BUSSES > 1
+int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- int bus_idx, ret=0;
+ int ret = 0;
+ unsigned int bus_no;
- if (argc == 1)
+ if (argc == 0)
/* querying current setting */
printf("Current bus is %d\n", i2c_get_bus_num());
else {
- bus_idx = simple_strtoul(argv[1], NULL, 10);
- printf("Setting bus to %d\n", bus_idx);
- ret = i2c_set_bus_num(bus_idx);
+ bus_no = simple_strtoul(argv[1], NULL, 10);
+ if (bus_no >= CONFIG_SYS_NUM_I2C_BUSSES) {
+ printf("Invalid bus %d\n", bus_no);
+ return -1;
+ }
+ printf("Setting bus to %d\n", bus_no);
+ ret = i2c_set_bus_num(bus_no);
if (ret)
printf("Failure changing bus number (%d)\n", ret);
}
return ret;
}
-#endif /* CONFIG_I2C_MULTI_BUS */
+#endif /* CONFIG_SYS_NUM_I2C_BUSSES > 1 */
static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char *
const argv[])
{
@@ -1263,16 +1298,20 @@ static int do_i2c_nm(cmd_tbl_t * cmdtp, int flag, int
argc, char * const argv[])
static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const
argv[])
{
+#if defined(CONFIG_SYS_I2C)
+ i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr);
+#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
return 0;
}
static cmd_tbl_t cmd_i2c_sub[] = {
-#if defined(CONFIG_I2C_MUX)
- U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_add_bus, "", ""),
+#if (CONFIG_SYS_NUM_I2C_BUSSES > 1) && defined(CONFIG_SYS_I2C)
+ U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""),
#endif /* CONFIG_I2C_MUX */
U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
-#if defined(CONFIG_I2C_MULTI_BUS)
+#if (CONFIG_SYS_NUM_I2C_BUSSES > 1) && defined(CONFIG_SYS_I2C)
U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
#endif /* CONFIG_I2C_MULTI_BUS */
U_BOOT_CMD_MKENT(loop, 3, 1, do_i2c_loop, "", ""),
@@ -1319,11 +1358,11 @@ static int do_i2c(cmd_tbl_t * cmdtp, int flag, int
argc, char * const argv[])
U_BOOT_CMD(
i2c, 6, 1, do_i2c,
"I2C sub-system",
-#if defined(CONFIG_I2C_MUX)
- "bus [muxtype:muxaddr:muxchannel] - add a new bus reached over
muxes\ni2c "
+#if CONFIG_SYS_NUM_I2C_BUSSES > 1
+ "bus [muxtype:muxaddr:muxchannel] - show I2C bus info\n"
#endif /* CONFIG_I2C_MUX */
"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
-#if defined(CONFIG_I2C_MULTI_BUS)
+#if CONFIG_SYS_NUM_I2C_BUSSES > 1
"i2c dev [dev] - show or set current I2C bus\n"
#endif /* CONFIG_I2C_MULTI_BUS */
"i2c loop chip address[.0, .1, .2] [# of objects] - looping read of
device\n"
diff --git a/common/stdio.c b/common/stdio.c
index 1bf9ba0..08337f9 100644
--- a/common/stdio.c
+++ b/common/stdio.c
@@ -1,4 +1,8 @@
/*
+ * Copyright (C) 2009 Sergey Kubushyn <k...@koi8.net>
+ *
+ * Changes for multibus/multiadapter I2C support.
+ *
* (C) Copyright 2000
* Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arse...@tin.it
*
@@ -30,7 +34,8 @@
#ifdef CONFIG_LOGBUFFER
#include <logbuff.h>
#endif
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) \
+ || defined(CONFIG_SYS_I2C_ADAPTERS)
#include <i2c.h>
#endif
@@ -211,9 +216,15 @@ int stdio_init (void)
#ifdef CONFIG_ARM_DCC_MULTI
drv_arm_dcc_init ();
#endif
+#ifdef CONFIG_SYS_I2C
+#ifdef CONFIG_SYS_I2C_ADAPTERS
+ i2c_init_all();
+#endif
+#else
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
+#endif
#ifdef CONFIG_LCD
drv_lcd_init ();
#endif
diff --git a/include/i2c.h b/include/i2c.h
index 910552d..e482827 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -203,15 +203,6 @@ int i2c_mux_ident_muxstring_f (uchar *buf);
#ifdef CONFIG_SYS_I2C
/*
- * Initialization, must be called once on start up, may be called
- * repeatedly to change the speed and slave addresses.
- */
-void i2c_init(unsigned int speed, int slaveaddr);
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
-void i2c_init_board(void);
-#endif
-
-/*
* i2c_get_bus_num:
*
* Returns index of currently active I2C bus. Zero-based.
--
1.7.7.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
