Hi Stefano,
Le 14/01/2012 10:48, Stefano Babic a écrit :
On 14/01/2012 09:47, Albert ARIBAUD wrote:
(re-sent due to the U-Boot MX rejecting my provider's servers -- again)
Hi Stefano,
Hi Albert, hi Tom,
drivers/usb/host/libusb_host.o: In function `usb_lowlevel_init':
/home/uboot/src/u-boot-arm/drivers/usb/host/ehci-hcd.c:814: undefined
reference to `ehci_hcd_init'
The twister board depends on several patches for the AM3517 processor
previously senty by Ilya Yanok. One of them (maybe because it is USB
related and should go into u-boot-usb) is missing.
http://patchwork.ozlabs.org/patch/130952/
Board then compiles but with warnings for 4 declared but unused symbols.
The patch is set to new and assigned to Remy, but he gived up as
maintainer - nobody checks at it ;-(.
Considering that all it does is adding a new EHCI driver, the worst
impact it can have is to not function properly for boards using it,
which at the moment means omap3_beagle and tam3517; but it won't affect
USB on existing boards.
But then I wonder why twister needs it at all, as it does not have a
single USB config option in its header config file...
I can at least sent my tested-by - it was nice if you can pick it up.
*If* someone can explain to me why a patch that adds a new USB EHCI
driver is needed by a board which does not have any "USB" in its config
header file, and *unless Wolfgang says otherwise*, I agree to accept
patch 130952 with your Tested-By.
Best regards,
Stefano
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
