> Signed-off-by: Vasily Khoruzhick <anars...@gmail.com>
> ---
> v2: mmcinfo is necessary to scan card for partitions
>
> board/zipitz2/zipitz2.c | 8 ++++++++
> include/configs/zipitz2.h | 5 +++--
> 2 files changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c
> index b093c2f..4075fb6 100644
> --- a/board/zipitz2/zipitz2.c
> +++ b/board/zipitz2/zipitz2.c
> @@ -79,6 +79,14 @@ void dram_init_banksize(void)
> gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
> }
>
> +#ifdef CONFIG_CMD_MMC
> +int board_mmc_init(bd_t *bis)
> +{
> + pxa_mmc_register(0);
> + return 0;
> +}
> +#endif
> +
> #ifdef CONFIG_CMD_SPI
>
> struct {
> diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
> index 75de677..1b14cc7 100644
> --- a/include/configs/zipitz2.h
> +++ b/include/configs/zipitz2.h
> @@ -45,7 +45,7 @@
> #define CONFIG_ARCH_CPU_INIT
>
> #define CONFIG_BOOTCOMMAND
\
> - "if mmc init && fatload mmc 0 0xa0000000 uboot.script ; then " \
> + "if mmcinfo && ext2load mmc 0 0xa0000000 boot/uboot.script ; then "
mmcinfo? WHY?!
> \
> "source 0xa0000000; " \
> "else " \
> "bootm 0x60000; " \
> @@ -91,7 +91,8 @@
> */
> #ifdef CONFIG_CMD_MMC
> #define CONFIG_MMC
> -#define CONFIG_PXA_MMC
> +#define CONFIG_GENERIC_MMC
> +#define CONFIG_PXA_MMC_GENERIC
> #define CONFIG_SYS_MMC_BASE 0xF0000000
> #define CONFIG_CMD_FAT
> #define CONFIG_CMD_EXT2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
