The current implementation invalidates the cache instead of flushing
it. This causes problems on platforms where the spl/u-boot is already
loaded to the RAM, with caches enabled by a first stage bootloader.
The V bit of the cp15's control register c1 is set to the value of
VINITHI on reset. Do not clear this bit by default, as there are SOC's
with no valid memory region at 0x0.
Signed-off-by: Sughosh Ganu <urwithsugh...@gmail.com>
Cc: Albert Aribaud <albert.u.b...@aribaud.net>
---
Changes since V1
* Added arm926 keyword to the subject line
* Removed the superfluous setting of r0.
* Fixed the comment to reflect the fact that V is not being cleared
arch/arm/cpu/arm926ejs/start.S | 9 ++++++---
1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 6a09c02..6e261c2 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -355,17 +355,20 @@ _dynsym_start_ofs:
*/
cpu_init_crit:
/*
- * flush v4 I/D caches
+ * flush D cache before disabling it
*/
mov r0, #0
- mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
+flush_dcache:
+ mrc p15, 0, r15, c7, c10, 3
+ bne flush_dcache
+
mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
/*
* disable MMU stuff and caches
*/
mrc p15, 0, r0, c1, c0, 0
- bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */
+ bic r0, r0, #0x00000300 /* clear bits 9:8 ( --RS) */
bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */
orr r0, r0, #0x00000002 /* set bit 2 (A) Align */
orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */
--
1.7.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
