This patch is added to correct some of the AM335X config
parameters which were incorrect along with some cleanup
like removing unused code.

Signed-off-by: Chandan Nath <chandan.n...@ti.com>
Signed-off-by: Tom Rini <tr...@ti.com>
---
Changes since v3:
 - Splitted 1st patch into 3 patches
 - Addressed review comments

Changes since v2:
 - No change

Changes since v1:
 - Changed CONFIG_AM335X to CONFIG_AM33XX
 - Rebased to master branch

 include/configs/am335x_evm.h |   11 +++--------
 1 files changed, 3 insertions(+), 8 deletions(-)

diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index f737094..c189031 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -30,7 +30,7 @@
 #define CONFIG_AM335X_CONFIG_DDR
 #define CONFIG_ENV_SIZE                        0x400
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (8 * 1024))
-#define CONFIG_SYS_PROMPT              "AM335X# "
+#define CONFIG_SYS_PROMPT              "U-Boot# "
 #define CONFIG_SYS_NO_FLASH
 #define MACH_TYPE_TIAM335EVM           3589    /* Until the next sync */
 #define CONFIG_MACH_TYPE               MACH_TYPE_TIAM335EVM
@@ -48,14 +48,12 @@
 
 /* Clock Defines */
 #define V_OSCK                         24000000  /* Clock output from T2 */
-#define V_SCLK                         (V_OSCK >> 1)
+#define V_SCLK                         (V_OSCK)
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for
-                                                  initial data */
 #define CONFIG_CMD_ECHO
 
 /* max number of command args */
-#define CONFIG_SYS_MAXARGS             32
+#define CONFIG_SYS_MAXARGS             16
 
 /* Console I/O Buffer Size */
 #define CONFIG_SYS_CBSIZE              512
@@ -75,7 +73,6 @@
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START \
                                        + (8 * 1024 * 1024))
 
-#undef  CONFIG_SYS_CLKS_IN_HZ          /* everything, incl board info, in Hz */
 #define CONFIG_SYS_LOAD_ADDR           0x81000000 /* Default load address */
 #define CONFIG_SYS_HZ                  1000 /* 1ms clock */
 
@@ -89,7 +86,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
                                                GENERATED_GBL_DATA_SIZE)
  /* Platform/Board specific defs */
-#define CONFIG_SYS_CLK_FREQ            24000000
 #define CONFIG_SYS_TIMERBASE           0x48040000      /* Use Timer2 */
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ                  1000
@@ -100,7 +96,6 @@
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
 #define CONFIG_SYS_NS16550_CLK         (48000000)
 #define CONFIG_SYS_NS16550_COM1                0x44e09000      /* Base EVM has 
UART0 */
-#define CONFIG_SYS_NS16550_COM4                0x481A6000      /* UART3 on IA 
BOard */
 
 #define CONFIG_BAUDRATE                115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 110, 300, 600, 1200, 2400, \
-- 
1.7.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to