HI Graeme,
On Wed, Jan 4, 2012 at 11:59 AM, Graeme Russ <graeme.r...@gmail.com> wrote:
> Signed-off-by: Graeme Russ <graeme.r...@gmail.com>
> ---
> Changes for v2:
> - Use an enum
> - Add defined for GDT size (previously added in patch 7)
> - Use X86_ namespace (as per Linux headers)
>
> arch/x86/cpu/cpu.c | 8 ++++----
> arch/x86/cpu/start.S | 3 ++-
> arch/x86/include/asm/processor.h | 23 +++++++++++++++++++----
> 3 files changed, 25 insertions(+), 9 deletions(-)
>
> diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
> index 61d0b69..209ff29 100644
> --- a/arch/x86/cpu/cpu.c
> +++ b/arch/x86/cpu/cpu.c
> @@ -63,13 +63,13 @@ static void reload_gdt(void)
> */
> static const u64 boot_gdt[] __attribute__((aligned(16))) = {
> /* CS: code, read/execute, 4 GB, base 0 */
> - [GDT_ENTRY_32BIT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff),
> + [X86_GDT_ENTRY_32BIT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff),
> /* DS: data, read/write, 4 GB, base 0 */
> - [GDT_ENTRY_32BIT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff),
> + [X86_GDT_ENTRY_32BIT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff),
> /* 16-bit CS: code, read/execute, 64 kB, base 0 */
> - [GDT_ENTRY_16BIT_CS] = GDT_ENTRY(0x109b, 0, 0x0ffff),
> + [X86_GDT_ENTRY_16BIT_CS] = GDT_ENTRY(0x109b, 0, 0x0ffff),
> /* 16-bit DS: data, read/write, 64 kB, base 0 */
> - [GDT_ENTRY_16BIT_DS] = GDT_ENTRY(0x1093, 0, 0x0ffff),
> + [X86_GDT_ENTRY_16BIT_DS] = GDT_ENTRY(0x1093, 0, 0x0ffff),
> };
> static struct gdt_ptr gdt;
>
> diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S
> index f87633b..6027f54 100644
> --- a/arch/x86/cpu/start.S
> +++ b/arch/x86/cpu/start.S
> @@ -29,6 +29,7 @@
> #include <config.h>
> #include <version.h>
> #include <asm/global_data.h>
> +#include <asm/processor.h>
> #include <asm/processor-flags.h>
> #include <generated/asm-offsets.h>
>
> @@ -58,7 +59,7 @@ _start:
> /* This is the 32-bit cold-reset entry point */
>
> /* Load the segement registes to match the gdt loaded in start16.S */
> - movl $0x18, %eax
> + movl $(X86_GDT_ENTRY_32BIT_DS * X86_GDT_ENTRY_SIZE), %eax
> movw %ax, %fs
> movw %ax, %ds
> movw %ax, %gs
> diff --git a/arch/x86/include/asm/processor.h
> b/arch/x86/include/asm/processor.h
> index 1e5dccd..aa8188e 100644
> --- a/arch/x86/include/asm/processor.h
> +++ b/arch/x86/include/asm/processor.h
> @@ -24,9 +24,24 @@
> #ifndef __ASM_PROCESSOR_H_
> #define __ASM_PROCESSOR_H_ 1
>
> -#define GDT_ENTRY_32BIT_CS 2
> -#define GDT_ENTRY_32BIT_DS (GDT_ENTRY_32BIT_CS + 1)
> -#define GDT_ENTRY_16BIT_CS (GDT_ENTRY_32BIT_DS + 1)
> -#define GDT_ENTRY_16BIT_DS (GDT_ENTRY_16BIT_CS + 1)
> +#define X86_GDT_ENTRY_SIZE 8
> +
> +#ifndef __ASSEMBLY__
> +
> +enum {
> + X86_GDT_ENTRY_NULL = 0,
> + X86_GDT_ENTRY_UNUSED,
> + X86_GDT_ENTRY_32BIT_CS,
> + X86_GDT_ENTRY_32BIT_DS,
> + X86_GDT_ENTRY_16BIT_CS,
> + X86_GDT_ENTRY_16BIT_DS,
> + X86_GDT_NUM_ENTRIES
> +};
> +#else
> +/* NOTE: If the above enum is modified, this define must be checked */
> +#define X86_GDT_ENTRY_32BIT_DS 3
Well then I suppose you could put an _ASM prefix on the #define
version, put it above the #ifdef and then add something like
#if X86_GDT_ENTRY_32BIT_DS != X86_GDT_ENTRY_32BIT_DS_ASM
#error "..."
#endif
but that it probably overkill since I suspect you are unlikely to change it.
Regards,
Simon
> +#endif
> +
> +#define X86_GDT_SIZE (X86_GDT_NUM_ENTRIES * X86_GDT_ENTRY_SIZE)
>
> #endif
> --
> 1.7.5.2.317.g391b14
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
