On Tuesday 03 January 2012 16:26:54 Bishop, Mark wrote: > Is this the list I can ask questions for deploying uboot to a custom > board based off the blackfin bf548?
this is the list for anything u-boot related > Some of my questions are not processor specific (like what is the > approach to getting the micrel ks8995 and a smsc lan9215 talking and > started -the ks8995 needs a spi start command)? the bf518f-ezbrd has a ksz8803m on it, but it supports it by open-coding things in board/bf518f-ezbrd/bf518f-ezbrd.c. there's a bit more logic than normal due to it handling different revs of the board -- older ones had the switch, but newer ones do not, hence it does runtime detection to support one binary image for all revs. i recall seeing people post about ksz switches in general, but i don't think that got anywhere, so what we did for the bf518f-ezbrd is probably your best bet for now. -mike
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
