On Tue, Jan 3, 2012 at 2:50 PM, Peter Bigot <big...@acm.org> wrote:
> On Tue, Jan 3, 2012 at 2:24 PM, Tom Rini <tr...@ti.com> wrote:
>> With certain SD cards the code detects a timeout when the hardware
>> has not timed out. We change the timeout used to match the kernel
>> which gives software 20ms to detect a timeout. We also define to
>> match the kernel and expand the previously incorrect comment.
>> Finally, we let get_timer() perform subtraction for us as it offers.
>
> This doesn't work for me with the SanDisk 4GB card on the
> BeagleBoard-xM. I updated the recipe to remove Andreas' original
> patch, substituted the new one, and I get the following, which is the
> behavior before I used Andreas' patch except that now it takes about
> 20 seconds for each timeout message to print.
I got this to work with two changes:
* s/MMC_TIMEOUT_USEC/MMC_TIMEOUT_MSEC/g and define MMC_TIMEOUT_MSEC
20, since get_timer does operate on msec in the current meta-ti
BeagleBoard-xM
* The patch below, which is what I think fixes the real problem (that
PSTATE.CMDI is still lit up when the function is entered).
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index c38b9e6..62b659a 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -198,7 +198,8 @@ static int mmc_send_cmd(struct mmc *mmc, struct
mmc_cmd *cmd,
ulong start;
start = get_timer(0);
- while ((readl(&mmc_base->pstate) & DATI_MASK) == DATI_CMDDIS) {
+#define CMDI_MASK (0x1 << 0)
+ while ((readl(&mmc_base->pstate) & (DATI_MASK | CMDI_MASK))) {
if (get_timer(0) - start > MAX_RETRY_MS) {
printf("%s: timedout waiting for cmddis!\n", __func__);
return TIMEOUT;
Peter
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
