Dear Michael Walle,

In message <1325545909-17678-1-git-send-email-mich...@walle.cc> you wrote:
> This patchset adds support for both the Linkstation Live (LS-CHLv2) and
> Linkstation Pro (LS-XHL) by Buffalo.

If Buffalo is the vendor, then why do you add this to the Marvell
vendor directory?


> +Michael Walle <mich...@walle.cc>
> +
> +     lsxl            ARM926EJS (Kirkwood SoC)

You add two boards, so please also maintain both.

> +#define CONFIG_FEROCEON_88FR131 1   /* CPU Core subversion */
> +#define CONFIG_KIRKWOOD     1   /* SOC Family Name */
> +#define CONFIG_KW88F6281    1   /* SOC Name */

Please don't define values for macros that select featues only.
Please fix globally.


> +#ifdef CONFIG_SPI_FLASH
> +#define CONFIG_SYS_MAX_FLASH_BANKS  1
> +#define CONFIG_SYS_MAX_FLASH_SECT   8
> +#define CONFIG_ENV_IS_IN_SPI_FLASH  1
> +#define CONFIG_ENV_SECT_SIZE        0x10000 /* 64K */
> +#else
> +#define CONFIG_ENV_IS_NOWHERE       1   /* if env in SDRAM */
> +#endif
> +#define CONFIG_ENV_SIZE         0x10000 /* 64k */
> +#define CONFIG_ENV_OFFSET       0x70000 /* env starts here */

Please use TABs only for vertical alignment.  Please fix globally.

> +#define CONFIG_ETHADDR  02:00:01:00:00:00
...
> +#define CONFIG_IPADDR                192.168.11.150
> +#define CONFIG_SERVERIP              192.168.11.1
> +#define CONFIG_NETMASK               255.255.255.0

NAK.  We do not allow such static network configurations.

> +#define CONFIG_BOOTARGS              "console=ttyS0,115200 root=/dev/sda2 "  
>        \
> +                             "netconsole=@"MK_STR(CONFIG_IPADDR)"/eth1"
> +#define CONFIG_EXTRA_ENV_SETTINGS                                            
>   \
> +     "bootsource=hdd\0"                                                     \
> +     "hdpart=0:1\0"                                                         \
> +     "bootcmd_net=tftpboot 0x00100000 uImage; "                             \
> +         "tftpboot 0x00800000 uInitrd; "                                    \
> +         "bootm 0x00100000 0x00800000\0"                                    \
> +     "bootcmd_hdd=ide reset; ext2load ide ${hdpart} 0x00100000 /uImage; "   \
> +         "ext2load ide ${hdpart} 0x00800000 /uInitrd; "                     \
> +         "bootm 0x00100000 0x00800000\0"                                    \

Indentation by TAB only, please.  Please fix globally.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
The more sins you confess, the more books you will sell.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to