V1 -> V2 * cleanups: replace printf with one argument by puts [1-2] * cleanups: remove unused macros and macro values / tabbing / remove FSF address [3] * i2c: move all local variables to SRAM [4] * OMAP SPL: call timer_init in s_init to make udelay work earlier [5] * hint CONFIG_SYS_TEXT_BASE changed in commit message [6] * remove log 'Texas Instruments Revision detection unimplemented' for overo [6] * remove unintended whitespaces [6] * send 'shut up' to TWL4030 to avoid corruption when reading board revision [6] * use macros for overo revisions [6] * don't separate SPL specific configurations [6]
Andreas Müller (6): drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts board/overo/overo.c: replace printf with one argument by puts include/configs/omap3_overo.h: several cleanups drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM OMAP SPL: call timer_init in s_init to make udelay work earlier overo: add SPL support / CONFIG_SYS_TEXT_BASE changed to 0x80100000 arch/arm/cpu/armv7/omap-common/spl.c | 6 +- arch/arm/cpu/armv7/omap3/board.c | 2 + arch/arm/include/asm/arch-omap3/mem.h | 26 +++++++ board/overo/config.mk | 28 -------- board/overo/overo.c | 69 ++++++++++++++++-- board/overo/overo.h | 5 ++ drivers/i2c/omap24xx_i2c.c | 25 ++++--- include/configs/omap3_overo.h | 122 ++++++++++++++++++++++---------- 8 files changed, 197 insertions(+), 86 deletions(-) delete mode 100644 board/overo/config.mk -- 1.7.6.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
