Dear Sridhar Addagada,
In message <1324360794.59571.yahoomail...@web120203.mail.ne1.yahoo.com> you
wrote:
>
> In an effort to find the cause of reboot from linux userspace, which
> was always returning hardreset, i traced the reason for the reset
> status register being cleared is from file
> arch/powerpc/cpu/mpc83xx/cpu_init.c,
>
> /* RSR - Reset Status Register - clear all status (4.6.1.3) */
> gd->reset_status __raw_readl(&im->reset.rsr);
> __raw_writel(~(RSR_RES), &im->reset.rsr);
>
>
> Can anyone throw some light why it is getting cleared and what is 4.6.1.3
"(4.6.1.3)" usually means the relevant section in the respective
user's manual (MPC8349E PowerQUICC II Pro Integrated Host Processor
Family Reference Manual, Rev. 1), here section "4.6.1.3 Reset Status
Register (RSR)" on page 4-37 ff.
The Note also explains why it makes sense to clear the register (so
you can get a sane state for only the next reset/reboot).
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
What can it profit a man to gain the whole world and to come to his
property with a gastric ulcer, a blown prostate, and bifocals?
-- John Steinbeck, _Cannery Row_
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
