Hi Chris, On Wed, Dec 14, 2011 at 7:08 PM, Chris Lalancette <clalance...@gmail.com> wrote: > On Wed, Dec 14, 2011 at 7:09 AM, Govindraj.R <govindraj.r...@ti.com> wrote: >> From: "Govindraj.R" <govindraj.r...@ti.com> >> >> Adds ehci-omap and two funcs omap_ehci_hcd_init/omap_ehci_hcd_stop >> Which can be called from any board file implementing the ehci_hcd_init/reset. >> One can pass the port modes from board file and configure the usb host >> to ulpi-phy mode or hsic mode. >> >> Signed-off-by: Govindraj.R <govindraj.r...@ti.com> >> --- >> arch/arm/include/asm/ehci-omap.h | 168 +++++++++++++++++++++++++++++++ >> drivers/usb/host/Makefile | 1 + >> drivers/usb/host/ehci-omap.c | 202 >> ++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 371 insertions(+), 0 deletions(-) >> create mode 100644 arch/arm/include/asm/ehci-omap.h >> create mode 100644 drivers/usb/host/ehci-omap.c >> >> diff --git a/arch/arm/include/asm/ehci-omap.h >> b/arch/arm/include/asm/ehci-omap.h >> new file mode 100644 >> index 0000000..c1af798 >> --- /dev/null >> +++ b/arch/arm/include/asm/ehci-omap.h >> @@ -0,0 +1,168 @@ > ... >> +/* Alt CLK SRC FOR AUX CLK 3 to USB3220C external PHY */ >> +#define SCRM_ALTCLKSRC 0x4a30A110UL >> +#define SCRM_AUXCLK3 0x4A30A31CUL > > I'll just point out here that the patch I recently posted to enable > the USB hub on panda > (http://lists.denx.de/pipermail/u-boot/2011-December/113194.html) adds > an scrm structure that also has these registers. Depending on which > order the patches go in, you might want to re-use that. >
Yes I have used your patch. (Refer to cover letter added this series depends on your patch http://www.mail-archive.com/u-boot@lists.denx.de/msg72797.html ) But during cleanup forgot to remove from the header file. Will remove this, Thanks for pointing this out. -- Regards, Govindraj.R _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
