Copying Wolfgang as he seems to be the author of this module.
On Wednesday 14 December 2011 01:45 AM, Stefan Kristiansson wrote:
Hi Aneesh,
On Tue, Dec 13, 2011 at 06:59:45PM +0530, Aneesh V wrote:
OMAP4 U-Boot is broken in the mainline. U-Boot wouldn't boot up on any
OMAP4 platforms. I suspect this will be the case with any ARM platform
that has enabled USB tty code. I git-bisected the issue to this patch.
I did some analysis on it and here are my findings.
aligned(2) indeed makes the sizeof(struct usb_endpoint_descriptor) ==
8. But that doesn't seem to be enough. struct acm_config_desc embeds
fields of type usb_endpoint_descriptor and has the attribute 'packed'.
As a result, these usb_endpoint_descriptor structures in
acm_config_desc may have odd addresses and consequently wMaxPacketSize
also has odd address. As far as I can see, this is not a new issue. But
your patch fortunately or unfortunately brought it out. Here is how:
When 'usb_endpoint_descriptor' didn't have the 'aligned' attribute,
compiler took extra care while accessing wMaxPacketSize. It did it
using two byte reads and combining them to make a 16-bit half-word.
When aligned was added compiler replaced it with a 'ldrh' (load
half-word) instruction that resulted in an abort due the odd address.
How unpleasent, nice that you were able to pinpoint where and how it fails
however.
Now, I am not sure how to solve this problem. I tried the following and
the boot issue is gone.
diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c
index e2e87fe..2a961e9 100644
--- a/drivers/serial/usbtty.c
+++ b/drivers/serial/usbtty.c
@@ -151,7 +151,7 @@ struct acm_config_desc {
/* Slave Interface */
struct usb_interface_descriptor data_class_interface;
struct usb_endpoint_descriptor data_endpoints[NUM_ENDPOINTS-1];
-} __attribute__((packed));
+};
static struct acm_config_desc
acm_configuration_descriptors[NUM_CONFIGS] = {
{
I am not a USB expert, so not sure whether this works. Does that
structure really have to be 'packed'? It will be great if USB experts
can look into this and come up with a permanent solution at the
earliest because quite a few platforms will be broken until then.
I am neither a USB expert, just the moron that apperantly broke a lot
of OMAP4 boards.
The way I see it there are 3 options at hand here:
1) revert my patch and look over the places where wMaxPacketSize is used
and wrap them in get/set_unaligned() (at least in non-arch specific code)
2) go forward with your approach
3) stop using usb_endpoint_descriptor in arrays
I think option nr 1 is the safest one here, but yes,
input from USB experts would be great.
Wolfgang,
What's your recommendation to solve this problem. Does the ACM
structure really have to be 'packed'? The packed attribute is resulting
in some of its fields to be at odd address, which in turn generates
alignment faults on access. My original mail has more details.
This is now affecting any ARM board that has USB_TTY enabled.
best regards,
Aneesh
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
