Dear Remy Bohmer, In message <CANqCtQ+-YHoMrE-A2QkbQvLi1YWJgN02o+maevub6xsgb=o...@mail.gmail.com> you wrote: > The following changes since commit c90a4dd79cb17abb46689f27ff9f1c971362d6e2: > > post/post.c: Use lldiv for 64-bit divisions (2011-12-10 23:15:14 +0100) > > are available in the git repository at: > git://git.denx.de/u-boot-usb.git master > > Jana Rapava (1): > USB: Add generic ULPI layer and a viewport > > Lei Wen (1): > USB: gadaget: add Marvell controller support > > Lukasz Majewski (2): > usb:gadget:s5p USB Device Controller (UDC) implementation > usb:gadget:s5p Enable the USB Gadget framework at GONI > > Marek Vasut (9): > USB: Add functionality to poll the USB keyboard via control EP > USB: Rework usb_kbd.c > USB: Drop dead code from usb_kbd.c > USB: Fix complaints about strict aliasing in OHCI-HCD > USB: Add usb_event_poll() to get keyboards working with EHCI > USB: MX5: Abstract out mx51 USB pixmux configuration > USB: MX5: Add MX5 usb post-init callback > USB: EHCI: Allow EHCI post-powerup configuration in board files > USB: efikamx: Enable USB on EfikaMX and EfikaSB > > Stefan Herbrechtsmeier (4): > pxa: fix usb host register mismatch > pxa: activate the first usb host port on pxa27x by default > pxa: convert pxa27x_udc to use read and write functions > usbtty: init endpoints prior to startup events > > Stefan Kristiansson (1): > usb: align usb_endpoint_descriptor to 16-bit boundary > > Veli-Pekka Peltola (2): > cosmetic: remove excess whitespace from usb command help > usb: add help for missing start subcommand > > Vincent Palatin (1): > ehci: speed up initialization > > Wolfgang Grandegger (5): > ehci-fsl: correct size of ehci caplength > USB: MX5: add helper functions to enable USB clocks > USB: MX5: add generic USB EHCI support for mx51 and mx53 > USB: mx53loco: add end enable USB host support on port 1 > USB: mx51evk: add end enable USB host support on port 1 > > Makefile | 1 + > arch/arm/cpu/armv7/mx5/clock.c | 72 ++ > arch/arm/cpu/pxa/usb.c | 6 +- > arch/arm/include/asm/arch-mx5/clock.h | 5 + > arch/arm/include/asm/arch-mx5/crm_regs.h | 3 + > arch/arm/include/asm/arch-pxa/pxa-regs.h | 10 +- > arch/arm/include/asm/arch-s5pc1xx/cpu.h | 4 + > board/efikamx/Makefile | 4 + > board/efikamx/efikamx-usb.c | 210 +++++ > board/efikamx/efikamx.c | 15 + > board/freescale/mx51evk/mx51evk.c | 62 ++ > board/freescale/mx53loco/mx53loco.c | 10 + > board/samsung/goni/goni.c | 48 +- > common/cmd_usb.c | 16 +- > common/usb_kbd.c | 928 +++++++------------ > drivers/serial/usbtty.c | 4 +- > drivers/usb/gadget/Makefile | 5 + > drivers/usb/gadget/gadget_chips.h | 7 + > drivers/usb/gadget/mv_udc.c | 499 ++++++++++ > drivers/usb/gadget/pxa27x_udc.c | 183 ++-- > drivers/usb/gadget/regs-otg.h | 271 ++++++ > drivers/usb/gadget/s3c_udc_otg.c | 892 ++++++++++++++++++ > drivers/usb/gadget/s3c_udc_otg_xfer_dma.c | 1444 > +++++++++++++++++++++++++++++ > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ehci-hcd.c | 47 +- > drivers/usb/host/ehci-mx5.c | 255 +++++ > drivers/usb/host/ohci-hcd.c | 75 +- > drivers/usb/ulpi/Makefile | 44 + > drivers/usb/ulpi/ulpi-viewport.c | 118 +++ > drivers/usb/ulpi/ulpi.c | 227 +++++ > include/configs/efikamx.h | 47 +- > include/configs/mx51evk.h | 13 + > include/configs/mx53loco.h | 13 + > include/configs/s5p_goni.h | 3 + > include/usb/ehci-fsl.h | 41 +- > include/usb/lin_gadget_compat.h | 62 ++ > include/usb/mv_udc.h | 151 +++ > include/usb/s3c_udc.h | 175 ++++ > include/usb/ulpi.h | 298 ++++++ > include/usbdescriptors.h | 2 +- > 40 files changed, 5512 insertions(+), 759 deletions(-) > create mode 100644 board/efikamx/efikamx-usb.c > create mode 100644 drivers/usb/gadget/mv_udc.c > create mode 100644 drivers/usb/gadget/regs-otg.h > create mode 100644 drivers/usb/gadget/s3c_udc_otg.c > create mode 100644 drivers/usb/gadget/s3c_udc_otg_xfer_dma.c > create mode 100644 drivers/usb/host/ehci-mx5.c > create mode 100644 drivers/usb/ulpi/Makefile > create mode 100644 drivers/usb/ulpi/ulpi-viewport.c > create mode 100644 drivers/usb/ulpi/ulpi.c > create mode 100644 include/usb/lin_gadget_compat.h > create mode 100644 include/usb/mv_udc.h > create mode 100644 include/usb/s3c_udc.h > create mode 100644 include/usb/ulpi.h
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "Just think of a computer as hardware you can program." - Nigel de la Tierre _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
