The early messages can be seen on the debug console.
Signed-off-by: Asen Chavdarov Dimov <di...@ronetix.at>
---
Change since v1
- rebased over master
board/ronetix/pm9263/pm9263.c | 22 ++++++++++++++--------
include/configs/pm9263.h | 1 +
2 files changed, 15 insertions(+), 8 deletions(-)
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index 59cca87..1266114 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -336,22 +336,28 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD */
-int board_init(void)
+int board_early_init_f(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- /* Enable Ctrlc */
- console_init_f();
-
- writel((1 << ATMEL_ID_PIOA) |
- (1 << ATMEL_ID_PIOCDE) |
- (1 << ATMEL_ID_PIOB),
+ /* Enable clocks for all PIOs */
+ writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
+ (1 << ATMEL_ID_PIOCDE),
&pmc->pcer);
+ at91_seriald_hw_init();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* arch number of AT91SAM9263EK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_PM9263;
+
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- at91_seriald_hw_init();
#ifdef CONFIG_CMD_NAND
pm9263_nand_hw_init();
#endif
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 374be27..32c5962 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -172,6 +172,7 @@
#undef CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_USER_LOWLEVEL_INIT 1
+#define CONFIG_BOARD_EARLY_INIT_F
/*
* Hardware drivers
--
1.7.4.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
