Hi Tom, Le 08/12/2011 17:48, Tom Warren a écrit :
Albert,Here's my rebased pull request. Thanks for your patience! The following changes since commit 15422043c4a213dc5d7d59a337be1ab34c9b2e7f: davinci: Remove unwanted memsize.c from hawkboard's nand spl build (2011-12-06 23:59:41 +0100) are available in the git repository at: git://git.denx.de/u-boot-tegra.git ..BRANCH.NOT.VERIFIED.. Simon Glass (9): tegra2: Add arch_cpu_init() to fire up Cortex-A9 tegra2: Simplify tegra_start() boot path arm: Move CP15 init out of cpu_init_crit() tegra2: Enable instruction cache tegra2: Remove unneeded boot code tegra2: Remove unneeded config option tegra2: Remove unused low-level Tegra2 UART code tegra2: Remove unneeded 'dynamic ram size' message tegra2: Don't use board pointer before it is set up Stephen Warren (4): tegra2: Move board_mmc_init into board files tegra2: Modify MMC driver to handle power and cd GPIOs tegra2: Add support for Ventana tegra2: Use new GPIO APIs in gpio_config_uart() MAINTAINERS | 5 + arch/arm/cpu/armv7/start.S | 36 +++--- arch/arm/cpu/armv7/tegra2/Makefile | 5 + arch/arm/cpu/armv7/tegra2/ap20.c | 54 +++++---- arch/arm/cpu/armv7/tegra2/ap20.h | 10 +- arch/arm/cpu/armv7/tegra2/board.c | 35 +++--- arch/arm/cpu/armv7/tegra2/config.mk | 7 +- arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 118 -------------------- arch/arm/include/asm/u-boot-arm.h | 3 + board/nvidia/common/board.c | 58 +--------- board/nvidia/common/board.h | 4 +- board/nvidia/harmony/harmony.c | 57 ++++++++-- board/nvidia/seaboard/seaboard.c | 81 ++++++++------ board/nvidia/ventana/Makefile | 49 ++++++++ boards.cfg | 1 + drivers/gpio/tegra2_gpio.c | 6 +- drivers/mmc/tegra2_mmc.c | 42 ++++++- drivers/mmc/tegra2_mmc.h | 4 +- drivers/serial/Makefile | 1 - drivers/serial/serial_tegra2.c | 77 ------------- include/configs/tegra2-common.h | 3 +- .../serial_tegra2.h => include/configs/ventana.h | 34 +++++- 22 files changed, 308 insertions(+), 382 deletions(-) create mode 100644 board/nvidia/ventana/Makefile delete mode 100644 drivers/serial/serial_tegra2.c rename drivers/serial/serial_tegra2.h => include/configs/ventana.h (51%)
Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
