Hi Albert,
please pull from u-boot-imx. It is rebased on u-boot mainline, because
Wolfgang has already merged your u-boot-arm/master + some fixes.
The following changes since commit d82a27bc5c404da907f71960a3ed2e148ac73fd0:
drivers/net/inca-ip_sw.c: Fix GCC 4.6 build warning (2011-12-08
21:01:19 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Jason Liu (4):
i.mx: introduce the armv7/imx-common folder
i.mx: add the initial support for freescale i.MX6Q processor
i.mx: mxc_gpio: add the i.mx6q support
i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board
Marek Vasut (4):
M28: Document that units has to be set to sectors on SD bootcard
M28: Fix typo
i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28
M28: Cleanup memsize.o OOT build
MAINTAINERS | 1 +
Makefile | 8 +
arch/arm/cpu/arm926ejs/mx28/Makefile | 4 +
.../arm/cpu/arm926ejs/mx28/mx28_init.h | 0
arch/arm/cpu/arm926ejs/mx28/spl_boot.c | 78 +
.../arm/cpu/arm926ejs/mx28/spl_mem_init.c | 2 +-
.../arm/cpu/arm926ejs/mx28/spl_power_init.c | 2 +-
.../m28evk => arch/arm/cpu/arm926ejs/mx28}/start.S | 0
.../arm/cpu/arm926ejs/mx28}/u-boot-spl.lds | 14 +-
arch/arm/cpu/armv7/imx-common/Makefile | 47 +
arch/arm/cpu/armv7/imx-common/cpu.c | 108 ++
arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c | 0
arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c | 17 +-
arch/arm/cpu/armv7/mx5/Makefile | 2 +-
arch/arm/cpu/armv7/mx5/soc.c | 77 -
arch/arm/cpu/armv7/mx6/lowlevel_init.S | 24 +
arch/arm/cpu/armv7/mx6/soc.c | 82 +
arch/arm/include/asm/arch-mx28/sys_proto.h | 6 +
arch/arm/include/asm/arch-mx6/ccm_regs.h | 892 +++++++++++
arch/arm/include/asm/arch-mx6/clock.h | 50 +
arch/arm/include/asm/arch-mx6/gpio.h | 35 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 236 +++
arch/arm/include/asm/arch-mx6/iomux-v3.h | 103 ++
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1683
++++++++++++++++++++
arch/arm/include/asm/arch-mx6/sys_proto.h | 38 +
board/denx/m28evk/Makefile | 11 +-
board/denx/m28evk/m28evk.c | 2 +-
board/denx/m28evk/{mmc_boot.c => spl_boot.c} | 61 +-
board/freescale/mx6qarm2/Makefile | 42 +
board/freescale/mx6qarm2/imximage.cfg | 167 ++
board/freescale/mx6qarm2/mx6qarm2.c | 155 ++
boards.cfg | 1 +
doc/README.m28 | 3 +-
drivers/gpio/mxc_gpio.c | 4 +-
include/configs/m28evk.h | 6 +-
include/configs/mx6qarm2.h | 162 ++
39 files changed, 4441 insertions(+), 167 deletions(-)
rename board/denx/m28evk/m28_init.h =>
arch/arm/cpu/arm926ejs/mx28/mx28_init.h (100%)
create mode 100644 arch/arm/cpu/arm926ejs/mx28/spl_boot.c
rename board/denx/m28evk/mem_init.c =>
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c (99%)
rename board/denx/m28evk/power_init.c =>
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c (99%)
rename {board/denx/m28evk => arch/arm/cpu/arm926ejs/mx28}/start.S (100%)
rename {board/denx/m28evk =>
arch/arm/cpu/arm926ejs/mx28}/u-boot-spl.lds (93%)
create mode 100644 arch/arm/cpu/armv7/imx-common/Makefile
create mode 100644 arch/arm/cpu/armv7/imx-common/cpu.c
rename arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c (100%)
rename arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c (84%)
mode change 100644 => 100755
create mode 100644 arch/arm/cpu/armv7/mx6/Makefile
create mode 100644 arch/arm/cpu/armv7/mx6/clock.c
create mode 100644 arch/arm/cpu/armv7/mx6/iomux-v3.c
create mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
create mode 100644 arch/arm/cpu/armv7/mx6/soc.c
create mode 100644 arch/arm/include/asm/arch-mx6/ccm_regs.h
create mode 100644 arch/arm/include/asm/arch-mx6/clock.h
create mode 100644 arch/arm/include/asm/arch-mx6/gpio.h
create mode 100644 arch/arm/include/asm/arch-mx6/imx-regs.h
create mode 100644 arch/arm/include/asm/arch-mx6/iomux-v3.h
create mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
create mode 100644 arch/arm/include/asm/arch-mx6/sys_proto.h
rename board/denx/m28evk/{mmc_boot.c => spl_boot.c} (87%)
create mode 100644 board/freescale/mx6qarm2/Makefile
create mode 100644 board/freescale/mx6qarm2/imximage.cfg
create mode 100644 board/freescale/mx6qarm2/mx6qarm2.c
create mode 100644 include/configs/mx6qarm2.h
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
