Dear Kim & Kumar,

many weeks ago in message
<20111023095323.2087511f9...@gemini.denx.de> I wrote:

> Dear Kumar Gala,
> 
> In message <2a6300e8-a874-49ac-84cb-be681af1b...@freescale.com> you wrote:
> > 
> > On Aug 26, 2011, at 1:32 PM, York Sun wrote:
> > 
> > > Update MPC8349EMDS to use unified DDR driver instead of spd_sdram.c.
> > > The unified driver can initialize data using DDR controller. No need to
> > > use DMA if just to initialze for ECC.
> > > 
> > > Signed-off-by: York Sun <york...@freescale.com>
> > > Signed-off-by: Kim Phillips <kim.phill...@freescale.com>
> > > ---
> > > board/freescale/mpc8349emds/Makefile      |    1 +
> > > board/freescale/mpc8349emds/ddr.c         |  107 
> > > +++++++++++++++++++++++++++++
> > > board/freescale/mpc8349emds/mpc8349emds.c |   26 ++++---
> > > include/configs/MPC8349EMDS.h             |   16 ++++
> > > 4 files changed, 139 insertions(+), 11 deletions(-)
> > > create mode 100644 board/freescale/mpc8349emds/ddr.c
> > 
> > applied to 85xx 'next'
> 
> Did you test it???
> 
> 
> This patch breaks out-of-tree building of the MPC8349EMDS board:
> 
> + MAKEALL_LOGDIR=/work/wd/tmp-ppc-LOG
> + BUILD_DIR=/work/wd/tmp-ppc
> + ./MAKEALL MPC8349EMDS
> Configuring for MPC8349EMDS board...
> make[1]: *** No rule to make target 
> `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend.ddr-gen2', needed by 
> `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend'.  Stop.
> make[1]: *** No rule to make target 
> `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend.ddr-gen2', needed by 
> `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend'.  Stop.
> make: *** [depend] Error 2
> 
> [Local building works.]
> 
> 
> Note also that "make distclean" still leaves a file
> arch/powerpc/cpu/mpc83xx/ddr-gen2.c
> 
> Please fix this, too.

Is anybody going to fix this?  Or can I assume the board is dead and
we can remove it?

Thanks.

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
"The first rule of magic is simple. Don't waste your time waving your
hands and hoping when a rock or a club will do."
                                               - McCloctnik the Lucid
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to