> This patchset adds the USB support for MX5x. Most of the code is based on > work of Wolfgang Grandegger with modifications done by various other > authors. I also included version of ULPI support code cleaned up by Igor > Grinberg. > > NOTE: I'd really love to get this code into .12 release. Remy, Wolfgang, do > you think it'd be possible? I'd really help adoption of the MX5x USB code > greatly as well as cleanup of the ULPI code (which is sadly in a bad > shape). > > Jana Rapava (1): > USB: Add generic ULPI layer and a viewport > > Marek Vasut (4): > USB: MX5: Abstract out mx51 USB pixmux configuration > USB: MX5: Add MX5 usb post-init callback > USB: EHCI: Allow EHCI post-powerup configuration in board files > USB: efikamx: Enable USB on EfikaMX and EfikaSB > > Wolfgang Grandegger (4): > USB: MX5: add helper functions to enable USB clocks > USB: MX5: add generic USB EHCI support for mx51 and mx53 > USB: mx53loco: add end enable USB host support on port 1 > USB: mx51evk: add end enable USB host support on port 1 > > Makefile | 1 + > arch/arm/cpu/armv7/mx5/clock.c | 72 +++++++ > arch/arm/include/asm/arch-mx5/clock.h | 5 + > arch/arm/include/asm/arch-mx5/crm_regs.h | 3 + > board/efikamx/Makefile | 4 + > board/efikamx/efikamx-usb.c | 210 +++++++++++++++++++++ > board/efikamx/efikamx.c | 15 ++ > board/freescale/mx51evk/mx51evk.c | 62 ++++++ > board/freescale/mx53loco/mx53loco.c | 10 + > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ehci-hcd.c | 12 +- > drivers/usb/host/ehci-mx5.c | 255 +++++++++++++++++++++++++ > drivers/usb/ulpi/Makefile | 44 +++++ > drivers/usb/ulpi/ulpi-viewport.c | 118 ++++++++++++ > drivers/usb/ulpi/ulpi.c | 227 +++++++++++++++++++++++ > include/configs/efikamx.h | 47 ++++- > include/configs/mx51evk.h | 13 ++ > include/configs/mx53loco.h | 13 ++ > include/usb/ehci-fsl.h | 16 ++ > include/usb/ulpi.h | 298 > ++++++++++++++++++++++++++++++ 20 files changed, 1418 insertions(+), 8 > deletions(-) > create mode 100644 board/efikamx/efikamx-usb.c > create mode 100644 drivers/usb/host/ehci-mx5.c > create mode 100644 drivers/usb/ulpi/Makefile > create mode 100644 drivers/usb/ulpi/ulpi-viewport.c > create mode 100644 drivers/usb/ulpi/ulpi.c > create mode 100644 include/usb/ulpi.h > > Cc: Igor Grinberg <grinb...@compulab.co.il> > Cc: Jana Rapava <ferma...@gmail.com> > Cc: Remy Bohmer <li...@bohmer.net> > Cc: Simon Glass <s...@chromium.org> > Cc: Stefano Babic <sba...@denx.de> > Cc: Wolfgang Grandegger <w...@denx.de>
If some of the patches didn't make it through gmail because of the different From:, please check git://git.denx.de/u-boot-marex.git, "usb" branch. M _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
