I missed this patch when I was gathering up the change which introduce the coreboot cpu/board/config. This should be applied on top of it, or folded into it.
Gabe On Mon, Nov 28, 2011 at 9:21 PM, Gabe Black <gabebl...@chromium.org> wrote: > The ports for the IDE controller were reversed. Because u-boot was > configured to look for at most one bus with one disk attached, it looked at > the wrong one, didn't find anything, and quit looking. > > This change does not increase the number of busses or devices per bus that > u-boot should check for because scanning for them adds a noticable pause > during boot. It does, however, correct some comments describing the limits. > > Signed-off-by: Gabe Black <gabebl...@chromium.org> > --- > include/configs/coreboot.h | 8 ++++---- > 1 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h > index c658436..348a25b 100644 > --- a/include/configs/coreboot.h > +++ b/include/configs/coreboot.h > @@ -67,14 +67,14 @@ > #define CONFIG_SYS_NS16550_COM2 UART1_BASE > #define CONFIG_SYS_NS16550_PORT_MAPPED > > -/* max. 2 IDE busses */ > +/* max. 1 IDE bus */ > #define CONFIG_SYS_IDE_MAXBUS 1 > -/* max. 2 drives per IDE bus */ > +/* max. 1 drive per IDE bus */ > #define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS * 1) > > #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ISA_IO_BASE_ADDRESS > -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0170 > -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x01F0 > +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01f0 > +#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0170 > #define CONFIG_SYS_ATA_DATA_OFFSET 0 > #define CONFIG_SYS_ATA_REG_OFFSET 0 > #define CONFIG_SYS_ATA_ALT_OFFSET 0x200 > -- > 1.7.3.1 > >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
