Add a host capability checking to avoid the mmc stack
switch the card to HIGHSPEED mode when the card supports
HIGHSPEED while the host doesn't.
This patch avoid furthur transaction problem when the
mmc/sd card runs different mode to the host.
Signed-off-by: Macpaul Lin <macp...@andestech.com>
---
Changes for v2:
- Replace OR logic by AND logic; switch to high speed if controller
support one of the high speed mode.
Changes for v3:
- Correct the incorrect patch format.
Changes for v4:
- Update patch version number due to inappropiate message flooding by
Andes's SMTP server.
drivers/mmc/mmc.c | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 21665ec..98abf1c 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -785,6 +785,16 @@ retry_scr:
if (!(__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED))
return 0;
+ /*
+ * If the host doesn't support SD_HIGHSPEED, do not switch card to
+ * HIGHSPEED mode even if the card support SD_HIGHSPPED.
+ * This can avoid furthur problem when the card runs in different
+ * mode between the host.
+ */
+ if (!((mmc->host_caps & MMC_MODE_HS_52MHz) &&
+ (mmc->host_caps & MMC_MODE_HS)))
+ return 0;
+
err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, 1, (u8 *)switch_status);
if (err)
--
1.7.3.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
