On 24/11/2011 13:04, Wolfgang Denk wrote: > There are at least a few attempts to define such standard settings. > Unfortunately they did not get really far yet, not has this been > documented yet (only a few variables like u-boot, u-boot_addr_r, > u-boot_addr, bootfile, kernel_addr_r, kernel_addr, fdtfile, > fdt_addr_r, fdt_addr, ... have been documented in the README). > More such patches are welcome. > > But I agree that your settings make much more sense as they fit into a > pretty common "look and feel".
Ok - I will then move at least part of the CONFIG_EXTRA_ENV_SETTINGS in the common file, letting the possibility to the board to replace or add further variables. >> We could use partition names as "kernel", "rootfs" to split the NAND. In >> this way, the boot command still works if the customer rearrange the >> size of partitions with the mtdparts variable. Of course, this wiorks >> only if in the kernel the mtdparts variable is parsed >> (CONFIG_MTD_CMDLINE_PARTS must be set). > > This should be done indeed. It will also be needed to support UBI / > UBIFS which I consider mandatory on NAND based devices. I have not set UBI for the twister - I will add it, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
