MACH_TYPE_HHP_CRADLE was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschin <ag...@denx.de>
---
board/cradle/cradle.c | 3 ---
include/configs/cradle.h | 3 +++
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/cradle/cradle.c b/board/cradle/cradle.c
index 2bbf2d5..e9f38f8 100644
--- a/board/cradle/cradle.c
+++ b/board/cradle/cradle.c
@@ -191,9 +191,6 @@ board_init (void)
led_code (0xf, YELLOW);
- /* arch number of HHP Cradle */
- gd->bd->bi_arch_number = MACH_TYPE_HHP_CRADLE;
-
/* adress of boot parameters */
gd->bd->bi_boot_params = 0xa0000100;
diff --git a/include/configs/cradle.h b/include/configs/cradle.h
index 25be616..d56deee 100644
--- a/include/configs/cradle.h
+++ b/include/configs/cradle.h
@@ -35,6 +35,9 @@
#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
#define CONFIG_HHP_CRADLE 1 /* on an Cradle Board */
+#define MACH_TYPE_HHP_CRADLE 210
+#define CONFIG_MACH_TYPE MACH_TYPE_HHP_CRADLE
+
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/* we will never enable dcache, because we have to setup MMU first */
--
1.7.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
