Dear Kumar Gala,
In message <alpine.lfd.2.00.1111110817050.8...@right.am.freescale.net> you
wrote:
> The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
> 07:44:52 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx.git master
>
> Jerry Huang (2):
> powerpc/mpc85xx: Set SYSCLK to the required frequency
> powerpc/85xx: Set max alloc length to 10MB on P1022DS
>
> Kumar Gala (20):
> powerpc/85xx: Add support for Book-E MMU Arch v2.0
> powerpc/85xx: Fix MPC8572DS NAND build
> powerpc/85xx: Fix NAND SPL support
> arch/powerpc/cpu/mpc85xx/cpu_init.c: Fix GCC 4.6 build warning
> arch/powerpc/cpu/mpc85xx/tlb.c: Fix GCC 4.6 build warning
> arch/powerpc/cpu/mpc8xxx/fsl_lbc.c: Fix GCC 4.6 build warning
> board/freescale/common/cds_pci_ft.c: Fix GCC 4.6 build warning
> board/freescale/common/pixis.c: Fix GCC 4.6 build warning
> board/freescale/mpc8548cds/mpc8548cds.c: Fix GCC 4.6 build warning
> board/freescale/mpc8568mds/mpc8568mds.c: Fix GCC 4.6 build warning
> board/freescale/mpc8569mds/mpc8569mds.c: Fix GCC 4.6 build warning
> board/sbc8548/sbc8548.c: Fix GCC 4.6 build warning
> board/sbc8560/sbc8560.c: Fix GCC 4.6 build warning
> drivers/net/fm/fm.c: Fix GCC 4.6 build warning
> drivers/usb/host/ehci-fsl.c: Fix GCC 4.6 build warning
> drivers/qe/uec.c: Fix GCC 4.6 build warning
> arch/powerpc/cpu/mpc8xxx/ddr/options.c: Fix GCC 4.6 build warning
> arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c: Fix GCC 4.6 build warning
> arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c: Fix GCC 4.6 build warning
> powerpc/85xx: Fix builds of P1020/P2020RDB-PC_36BIT_NAND
>
> Poonam Aggrwal (1):
> fsl_ifc: Fixed a bug in the erratum handling code for IFC_A003399
>
> Ramneek Mehresh (2):
> powerpc/85xx: Fix warning for USB device-fixup
> powerpc/85xx: Make inclusion of USB device fixup conditional
>
> Roy Zang (1):
> powerpc/QorIQ: fix network frame manager TBI PHY address settings
>
> Timur Tabi (5):
> powerpc/85xx: fix definition of MAS register macros
> powerpc/85xx: fix some comments in the CCSR relocation code
> powerpc/85xx: add some missing sync instructions in the CCSR relocation
> code
> powerpc/85xx: verify the current address of CCSR before relocating it
> powerpc/85xx: resize the boot page TLB before relocating CCSR
>
> Xie Xiaobo (1):
> phylib: Enable AR8021 phy support
>
> chenhui zhao (2):
> powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129
> powerpc/mpc8548cds: Fix network initialization
>
> arch/powerpc/cpu/mpc85xx/cmd_errata.c | 4 +
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 3 +-
> arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 4 +-
> arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 7 ++-
> arch/powerpc/cpu/mpc85xx/start.S | 84 ++++++++++++++++++++++-
> arch/powerpc/cpu/mpc85xx/tlb.c | 17 +++--
> arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 7 +--
> arch/powerpc/cpu/mpc8xxx/ddr/options.c | 4 +
> arch/powerpc/cpu/mpc8xxx/fdt.c | 24 ++++---
> arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 4 +-
> arch/powerpc/include/asm/config_mpc85xx.h | 1 +
> arch/powerpc/include/asm/mmu.h | 10 ++--
> arch/powerpc/include/asm/processor.h | 6 ++
> board/freescale/common/cds_pci_ft.c | 3 +-
> board/freescale/common/ics307_clk.c | 69 ++++++++++++++++++
> board/freescale/common/ics307_clk.h | 4 +-
> board/freescale/common/ngpixis.c | 27 +++++++
> board/freescale/common/pixis.c | 4 +-
> board/freescale/corenet_ds/eth_hydra.c | 8 --
> board/freescale/corenet_ds/eth_p4080.c | 8 --
> board/freescale/mpc8548cds/mpc8548cds.c | 69 +++++++++++++++---
> board/freescale/mpc8568mds/mpc8568mds.c | 3 +-
> board/freescale/mpc8569mds/mpc8569mds.c | 2 -
> board/freescale/mpc8572ds/tlb.c | 2 +
> board/freescale/p1010rdb/p1010rdb.c | 2 +
> board/freescale/p1_p2_rdb/p1_p2_rdb.c | 2 +
> board/freescale/p1_p2_rdb_pc/law.c | 10 ++-
> board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 3 +
> board/freescale/p2041rdb/eth.c | 8 --
> board/sbc8548/sbc8548.c | 2 -
> board/sbc8560/sbc8560.c | 3 +-
> drivers/net/fm/fm.c | 3 +-
> drivers/net/tsec.c | 93
> +++++++++++++++++++++++++
> drivers/qe/uec.c | 7 --
> drivers/usb/host/ehci-fsl.c | 4 +-
> include/config_phylib_all_drivers.h | 1 +
> include/configs/MPC8536DS.h | 2 +-
> include/configs/MPC8548CDS.h | 2 +
> include/configs/MPC8569MDS.h | 2 +-
> include/configs/MPC8572DS.h | 2 +-
> include/configs/P1022DS.h | 2 +-
> include/configs/P1_P2_RDB.h | 2 +-
> include/configs/p1_p2_rdb_pc.h | 2 +-
> 43 files changed, 420 insertions(+), 106 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
The only person who always got his work done by Friday
was Robinson Crusoe.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
