Hello Heiko,
thanks for your comments!
On Wed, Nov 16, 2011 at 7:35 AM, Heiko Schocher <h...@denx.de> wrote:
> Christian Riesch wrote:
>> Signed-off-by: Christian Riesch <christian.rie...@omicron.at>
>> Cc: Heiko Schocher <h...@denx.de>
>> Cc: Sandeep Paulraj <s-paul...@ti.com>
>> ---
>> arch/arm/cpu/arm926ejs/davinci/Makefile | 3 ++-
>> arch/arm/cpu/arm926ejs/davinci/spl.c | 11 ++++++++++-
>> 2 files changed, 12 insertions(+), 2 deletions(-)
>>
[...]
>> diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c
>> b/arch/arm/cpu/arm926ejs/davinci/spl.c
>> index d9b9398..bb4ee13 100644
>> --- a/arch/arm/cpu/arm926ejs/davinci/spl.c
>> +++ b/arch/arm/cpu/arm926ejs/davinci/spl.c
[...]
>> void board_init_r(gd_t *id, ulong dummy)
>> {
>> -
>> +#ifdef CONFIG_SOC_DM365
>> nand_init();
>> puts("Nand boot...\n");
>> nand_boot();
>> +#endif
>> +#ifdef CONFIG_SOC_DA8XX
>> + hang();
>> +#endif
>
> Maybe a comment why you call hang() here (I think because SPL code
> is not yet tried out on da8xx) would help here.
The code is tested on da8xx (the AM1808 I tested it on is part of the
da8xx family) but as I didn't yet look into loading an u-boot image
from SPI flash (which I should do here for the da850evm) I just call
hang() here. I commented on this in the cover message:
---snip---
This patchset is not a complete implementation, it is missing the
code that is actually used to load u-boot from SPI flash to the
DDR memory. The code just hangs after the initialization is done. But
I submit it nevertheless as RFC and I am looking forward to your comments.
---snip---
Regards, Christian
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
